Support for plants from old tire

The problem of the backup faces each gardener. In addition to functional

responsibilities, they should still fit into the "landscape". And also be easy in manufacturing and inexpensive

I decided to share the experience of creating an unusual support for plants in the garden Plot, may come in handy. So, we will need:

- support - a pipe from 150 to 200 media with a diameter of 1/2-3 / 4 inches (water supply unit);

- hoop - as a material will rise:

- old bike coats;

- hoops for rhythmic gymnastics (aluminum or plastic);

- Wire diameter

-6 mm, length - depending on the diameter of the bush;

- any twine, plastic tape for furniture packaging, knitting wire, etc.

Start mounting:

In the center of the bush, we rush to the depth of 50 cm.

Insert the hooks bent off the wire bent from the wire, which will hold the twine.

We wear the hoop on the bush. Choose the size of the hoop is easy, it is only necessary to know the diameter of the bush and the formula of the circumference length. If the hoop is made of the wire, then the ends of the hoop are connected using a brass tube or other soft metal, which must be flattened.

Using the twine (clinging it for hooks on the support), hang the hoop to the height. As a rule, the bush (depending on its size) requires 6 ropes.

That's all. The support for the bush has the appearance of a semistrated umbrella (see photo). Access to the base of the bush is free, which greatly facilitates care for it. The branches do not fall on the ground. For the winter, it is easily easier to tie a bush to avoid breakdown branches from snow.

Using the support, it is easy to cover a bush from birds and weather immersion, film, spunbond.

Also, applying this system, it is convenient to create temporary shelters for growing cucumbers and other vegetables.

And all this is practically no financial cost!

Valery Pyshkin

Sleeler for flowers with their own hands         Supports for Lian do it yourself (pergolas)