Stands instead of a goat

Our edges are rich in forests, and lattice waste has enough. Including delivery, the cargo machine with 10 cubes of long (4-6 m) resin crops costs 2000 rubles. I defined the place to unload the hill in front of the house: it's close to wood level, smooth, without dirt and in the sun.

First, the hill sort: straight and without knots good trimming for building needs I lay out into the stack at the fence, let the rest of the wood on firewood. I energize the pad of chainsaw and 4 special Stands instead of a goat.

Make them simply: in trimming a thick bar with a cross section of 150 × 150 mm and a length of 0.6 m should be drilled along the edges of two symmetrical holes in a depth of 125 mm and insert pieces of the reinforcement rod with a diameter of 18 mm and a length of 0.9 m. The optimal distance between the rods For my chainsaws - 0.4 m. If your tire tool is longer, then the distance can be increased,

I install on the ground in one line 3-4 stands at a distance of approximately 1.5 m from each other and lay a horn in them. When we saw one vertical stack on a piece, laying another.

Agree, compared with the porous sawmill, my way is much more efficient.