Mill do it yourself

His home and Dacha Nikolai Dmitrievich Eliseev designed himself, and, in particular, made window frames, platbands, the steps of the porch and even washing into the kitchen.

And to handle the most diverse wood material built a woodworking machine (photo 1, rice).

The metal corners attached 3 stainless steel sheets (0.5 cm).

I ordered a new shaft to which you can edit and saws, and cutters. The shaft joined the three-phase engine (4 kW, 380 V).

NOTE! When working with a saw, you must put the tabletop to close from sawdust.

Himself made curly cutters (photo 2), with the help of which any likes liked forms and boards, and lining, and even stapper began to do.

For your beloved granddaughter, I made a rocking horse on this machine.

Bath is also wooden, oak benches. In the boiler put small cobblestones - the water temperature is always comfortable, and the boiler does not overheat (photose).

For poultry need food, and it is very convenient to have his mini millwhich can be done with your own hands (photo 4). Nikolay Dmitrievich came up with her very quickly: all the processed materials were going to move and served. He took the brake drum from the trailer from the Tractor "Belarus", under the diameter of the drum cut the circle of sieve (photo 5). Sieve can be used from any meduller. The drum installed the engine (4 kW, 2800 revolutions) with the end mount, on the motor shaft - the hub with knives. It turns out the principle of the coffee grinder. Sito installed on the drum from under the washing machine "Riga", to which the bag adjusted on hooks (photo 6).

IMPORTANT! In the upper drum you need to make a hole where to insert a funnel or a cropped canister for loading the grain. Install the whole mill on a tripod. And Melit the grain to joy, and the bird on the punishment.

Handbook: Dry building mixes - are intended for a fairly wide range of works, for example, for masonry brick, the bay of foundation, plaster, etc. Pay attention when choosing a dry building mixture (cement, tile glue) on the manufacturer, as well as on the nomenclature indicated on the package in order to calculate the proportions when adding components.

Photo 1.

Photo 2.

Photo 3.

Photo 4.

Photo 5.

Photo 6.