For frame structures, fast heat loss is very characteristic, so when erecting a skeleton house, special attention should be paid to the material and methods of insulation, but first look at the technology of building country houses.
Consider the main types of insulation and their application:
Mingcle (mineral wool) - is one of the most popular types of thermal insulation, due to its non-hatching, high sound insulation, and light weight, which contributes to the convenience of mounting. The minus it is the toxicity and impossibility of use without additional waterproofing, because She absorbs moisture badly.
Polyfoam, as well as a modern insulation. Pros: does not require additional waterproofing, since it does not absorb moisture, it has a light weight, has a low cost. Cons: Low sound insulation and high degree of flammability, during which toxic substances are distinguished, contributes to the appearance of rodents.
Polyurethane Foolder, perhaps the latest type of thermal insulation from the above. It has high sound and thermal insulation, not a fuel, not toxic. Since it is a sprayed insulation, then existing emptiness existing emptiness is easily fill in the gun. After its hardening, it remains only to cut the surplus, and a solid monolithic wall is formed in front of you.
When insulating the frame home by the Ministry of Education and the Foam, the use of vapor - or waterproofing is required.
As a foil vaporizolation, consider the foam. It is stacked by foil to the shield, then a layer of thermal insulation, and on top of a layer of pergamine and a casing.
Waterproofing (pergamine). Bashed indoors, with a stapler to the staples of Kakrkas peaks (10 cm.), Followed by insulation.
The insulation of the ceiling of the frame house begins with an attic room, any of your chosen insulation.
What to treat a wooden house from within
Warming house from glued timber
Start a discussion ...