When buying or building a wooden house, its owner usually already has its own vision of the inner space, by the way the wooden house turnkey can be ordered here.
And there are two options: to preserve and emphasize the texture and color of the natural material, or to bore the walls and the ceiling, disguising the true nature of your housing. The processing of internal surfaces is carried out in order to protect against cores, mold and fungi, destroying wood. Use ready-made antiseptics and means manufactured at home. Before processing, the tree is cleared of dirt, dust, metal inclusions and polished. Smooth walls - mechanically, and the logs will have to be brought to smoothly manually. An antiseptic in 2-3 layers is applied to the clean smooth surface of the wood with a brush or brush, but it is better to use the paintopult, it will provide a more complete penetration of the liquid into small gaps and cracks and save the mass of time.
Home protection equipment is prepared from a copper municipal of 5-10% concentration (5-10 kg per 95-90 liters of water), as well as sodium siliced \u200b\u200bsodium sodium (95 liters of water - 2.5 kg of active ingredients). Soda as part of the means will give wood flame retardant properties. Burra and Boric Acid (1.75 kg per 96.5 liters of water) is a fairly effective antiseptic prepared at home. It has disconnecting properties not only for insects, but also small rodents (mice, earthling). The most affordable method is 1 kg of boric acid and 19 kg of salt on 80 liters of water, but the effect of such an antiseptic is short.
If it is planned to facing the log walls by plasterboard, then the processing of the antiseptic is carried out 3 times, without subsequent color. All works on the protection of wood are carried out only on unpainted surfaces.
After a complete drying (after 10-12 hours at a temperature of 20 ° C), the tree can be coated with a venge and varnish. Adherents of environmental housing advise to impart brilliance to polish the surface of the natural fear. For this, the wax heated to the plastic state is applied to the antiseptic tree treated and is brought to the smoothness of the rag.
The ceiling of wooden houses is especially subject to the influence of harmful insects and microorganisms, therefore, before mounting the attic heat insulation, the boards are treated with an antiseptic and outside.
Warming house from glued timber
Warming of the walls of the country house
Start a discussion ...