Bath trim inside with your own hands

To date, many country houses have separate bathrooms. This is an excellent space not only for recreation, but also for hardening health. Despite the fact that the creation of a bath will have to spend a lot of strength, the result is worth it. In the end, we will get a high-quality room that is not ashamed to show friends and relatives.

Most seriously follow the interior of the bathroom. Despite the fact that the room may look very increasingly, you need to know several important aspects related to the finish.

Of course, such a room should easily withstand high temperatures. In the bath, the air temperature can reach 120 degrees Celsius. Thus, it is necessary to responsibly carry out all construction work, as well as choose the materials suitable for quality and the scope of use.

At the same time, finishing materials must "breathe", otherwise the moisture will accumulate in the bath, which also negatively affects the condition of the entire premises. You can find a lot of curious options for finishing materials that can be used freely during the construction of the bath.

In this article we will focus in detail on each question associated with finishing bathrooms. Moreover, carefully analyze all the materials that are used in this process.

Bath interior materials

Many specialists in the construction industry recognized that the best finishing material, which is currently available in stores, is the lining (or trim panels). Despite the general ease of material, it is really able to "breathe", but at the same time the lining perfectly retains the optimal temperature indoor. Especially efficiently, the lining shows itself along with heat insulating materials.

Another positive side of the classic lining is simplicity of installation. Accordingly, for these works, it is not necessary to attract specialists who usually request a lot of money. All tasks will cope with all the tasks, but it is pre-detailed to study all the subtleties of the process.

Covering can easily separate all the walls and the ceiling. As a result, we will get a great bathroom, suitable for the park. In this case, the material will not lose its initial properties. However, it is still necessary to produce periodic care for the wood, otherwise you can encounter numerous problems (cracking, deterioration of thermal insulation).

It is important to know that it is impossible to use varnishes and verses as protective coatings. Practice shows that these materials adversely affect the state of human health. We are talking about those cases when the finishing material is under the action of high temperatures.

Wood selection Bath

First of all, you need to know that the quality of the finish directly depends on the quality of wood. When buying lining, you need to pay attention to the condition of the material. If there are some jar, scratches or other damage - it is better to do not even look towards such casing panels. Gradually, they will deteriorate and ultimately the lining will have to be replaced.

In addition, the surface of the lining should not be wet. This suggests that the production technology of this material was broken. If the lining still has a small moisture, you should dry the wood.

In such construction works, the lining of hardening trees is often used. As a result, we will have a high-quality finish that will not be heated with the whole room, but at the same time the wood will delay heat in the bath when necessary. At the same time, it will still have to monitor the material of the material so that it does not come into disrepair for various reasons.

Often, panels from linden are selected as finishes. This is excellent wood, but gradually the surface of such panels is beginning to darken. After some time, the appearance of the material will create not the most pleasant atmosphere. To avoid this characteristic change in wood, the surface should be treated with special coatings. They are often sold in construction stores. With this scenario, the linden material will always have the same attractive shade. Lipa is also good and the fact that it is very slowly heated, and for the bath it is a very important aspect.

Birch as finishing material is rarely used. It is about the fact that often birch dries a little, so after some time it loses its initial appearance. No protective coatings do not do here.

Sometimes builders are called aspen the best finishing wood. Most optimally use the lining of the aspen as a finishing material for the ceiling. With the right approach, this breed of wood becomes incredibly durable and durable. Of course, similar results are achieved by pretreatment, as well as correct drying. If everything is done correctly, then the aspen can be freely used as a ceiling coating. Many builders argue that often the aspen is so strong wood that it is almost impossible to score a nail into it. Accordingly, damaging the tree will also fail.

The process of arrangement of walls

Let us dwell on the floor and walls of the bath in more detail. As we have already spoken, in the overwhelming majority of cases, lining is used as a finishing material. Accordingly, the finishing process consists of several stages, which are shown below.

1. At the very beginning, a full-fledged project is drawn up. If all is well, then ultimately we will be able to approximately assess the necessary volumes of finishing material. To do this, it is necessary to measure the dimensions of all the necessary surfaces and make elementary calculations.
2. Next, the lining is selected. It should be borne in mind that there are many options for this material on sale, so the dimensions of the panels should be taken into account during the project calculations. At the same time, the size of the lining should be well combined with bathroom dimensions.
3. Now on the surface where the lining will be located, steamproofing is taking place. It is necessary in order to keep steam and prevent it from entering already equipped thermal insulation. Parosolation is attached to the surfaces with the help of construction scotch. It is impossible to allow no damage to the material, as well as gaps between the isolation strips.
4. Next is the lamp, on the basis of which the cladding will occur. Accordingly, wooden bars who can withstand the weight of the finish are attached around the perimeter. Directly for fastening the lining uses klyamimers. They will allow not only to quickly make a finishing material, but also quickly make disassembly if there is such a need for the future.
5. Well, at the very end there is a finite treatment of wood finish. The essence of this stage of work is that often on sale you can find untreated wood. To get the highest quality result, the final processing occurs after the installation of the lining, since during the attachment it is possible to damage the wood. After the lining is located on the walls, you can easily apply all the necessary protective layers. This is not only convenient, but also as efficiently as possible: each panel is in plain form, and the source of lighting will allow quality to view the entire surface.

On the Internet you can find a lot of finishing options that can be used in different rooms. This gives some kind of freedom of choice, allowing you to create your original bath. Of course, during the choice of options, it should be proceeded from the fact that the bathroom has a number of features to be addressed when choosing a tree of wood, as well as construction resources.

At the same time, on the basis of selected wood, you can create some other objects inside the bath. For example, it can be shelves, tables or chairs. Accordingly, in such conditions, we can create a single room of the room, from which everyone will unambiguously be delighted. It is also worth understanding that it is impossible to save on the bath. This is a premises that should be a warm atmosphere and comfort, despite the fact that they only come to the bath.

Features of the floor finish

Floor finish is an equally important aspect to which special attention should be paid. The thing is that the high-quality surface should provide even more cozy atmosphere, which will emphasize the quality and durability of the entire bathroom.

However, the process of finishing the floor may be fairly simple. Given the fact that at the floor level we have a relatively low temperature, here you can use wood, and tile, and many other materials. Of course, it is advisable to make it so that all components are well combined, because the bath is a special space.

It should immediately note that the surface of the floor, created on the basis of the tile, has some features. In the event that in the bath the temperature rose too high, touching the cafél can be slightly burning. This happens extremely rare, but there are still such cases. Accordingly, if you like to bathe with too high temperatures, it is better not to use a tile. But this finishing material will be a good choice if there is high humidity in the bath (or just water can get to the floor). In the bathroom, this is not uncommon, many people love to lean water straight from the bucket. Accordingly, a huge amount of water hits the floor.

The above scenario is not very adapted to wood, which can also be a floor coating. Under the action of water (or moisture), the tree will gradually deteriorate, darken. After some time, the surface will become too loose and unreliable. However, the wooden floor has a lot of advantages. It is about the fact that wood never overheats, it will be a natural building material that visitors will be pleased to feel their feet.

As for the fact that wood gradually comes to disrepair in the bath, then it is possible to approach this issue with the mind. Often, the wooden panels used to arrange the floor are carefully grinding, and also treated with protective compositions. Of course, it will not make a tree with a practically eternal option for finishing the floor, but this will significantly extend the service life. It should be borne in mind that it is necessary to constantly care for the wood, since at a certain point the process of decryption tree can begin too rapidly.

If the choice is made in favor of the tile, then here you should only periodically make care for it. It does not take away a lot of time, the surface will look attractive, despite the combination with wooden walls and ceiling. If you are concerned about the fact that the surface of the tile can be too hot, it should be borne in mind that on top of the tile you can arrange some material created on the basis of fabric. Accordingly, the woven product can be easily replaced (while spending only some money), and the high temperature of the tile will not be able to influence the bath visitors.

Materials that can not be used to finish a bathroom

Many people who really want to be owners of their own baths are doing everything possible to make a dream in life. In such conditions, the hosts can save on the most important things that can subsequently bring a lot of harm. Of course, the most basic is the choice of finishing materials.

Often in this process uses those building materials that were mentioned earlier in this material.

However, sometimes due to savings, people use completely inappropriate finishing products. Linoleum, plastic is the most unsuccessful materials that can be involved in the bath. In such conditions, plastic and linoleum will begin rapidly deteriorate, while it is likely to highlight unsafe substances (first of all it relates to plastic).

Also for finishing it is not recommended to use pine panels, as well as plates created on the basis of wood. These materials can easily ignore and lead to the most terrible consequences.

In any case, when choosing materials in construction stores, it still makes sense to ask consultants all the questions you are interested in. This will definitely help to avoid many problems.