Gypsum refers to environmentally friendly construction and finishing materials that have been widespread as a decorative element in the inner and exterior decoration of premises and buildings of various purposes.
Welding plaster stones are engaged in professional masters of many construction companies. But you can independently put a gypsum stone, following not cunning rules. You will need ordinary hacksaw, spatulas, putty for grouting seams, inexpensive tile glue, sponge, brush, sandpaper.
Technology laying a gypsum stone on a putty with grouting seams is similar to laying tiles. However, here you can use not too expensive and stood tiled glue. Before you start work, circle the place on which the stone will lie. Using the level, draw a few horizontal strips and proceed directly to the laying. Stone for divorced, according to the instructions on the package, tile glue. The distance between the stones can be completely different and depends on your desire. In the future, it will be filled with putty.
Decorative gypsum rock rarely has perfectly the same dimensions. Often it is a tile of various lengths, laying that you need to watch out that the joints would not coincide and there was a small shift of each subsequent series. After laying out complex forms, use the hacksaw.
In order to be beautiful and easily produce a grout of seams, make a simple device from a dense package., One end of which will need to be cut to the convenience of filling the diluted plaster wipe or grout, and on the other to make a small hole. Evenly squeezing the grout mass, you will cope very quickly with this painstaking work.
The final stacking stroke will become a tint of spins and scrolls of the manufacturer, which is usually sold along with a gypsum stone. Additionally, the gypsum stone can be coated with a layer of water varnish.
Archroom finish with artificial stone
Making a gypsum stone
Technology laying a gypsum stone on a putty with grouting seams
Still on this topic
Comments leave a comment
Start a discussion ...