Stuccoing wall

Currently there have been a lot of new materials for the facing and finishing of the facades of the buildings, so you give a neat and beautiful appearance of a country house or a cottage house - a small problem. And everything would be fine, but these are materials, alas, very expensive. Not every dacha can afford them, and it often simply makes no sense to separate the cottage to the country where you come only on weekends.
Therefore, despite the new-fashioned trends, the old ways of finishing the facades are used quite widely. One of them is splashing plaster. An additional solution can be applied to the plastered facade of the house by spraying by spraying by making the so-called "fur coat".
It looks like this finish is very good, but costs quite inexpensively, even at the current prices for building materials. However, this method has its drawback: the work is manual, which means that hard.
But the output, as always, you can find. Mechanize splashing process, save time and improve the quality of work will help pretty simple to make a device that is shown in our figure.
The mechanical sprayer is arranged as follows: in the case of sheet iron, four - or a hexless rotor rotates with the handle. Spring grippers are fixed at the ends of the blades. Having carried away from the bottom of the housing a certain amount of solution when rotating the rotor, the grippers spray it through the window in the housing, encountered (in the upper position) with the focus. For ease of use, a handle is attached from below, and a closing hatch for loading the solution is made in the housing. That is the whole secret of the fast and easy shocking of the facade.
The size of the mechanism body can be any. Of course, if the housing is greater, the solution will need to load it less frequently., But is it easy to keep so much a solution on weight? The smaller body will have to add a solution more often, but it is more convenient and easier to use this non-slip mechanism. Such a lightweight case can be made with a diameter of 28-30 cm and 12-15 cm wide. Figure 1 shows a general view of the squabbler, and in Figure 2, the mechanism in the context.

On a note:

The most important of the obvious arguments in favor of wooden windows is their environmental and aesthetic qualities. Wooden windows are remarkably combined with the doors, furniture, parquet and carry modern functionality and classical sophistication. Everyone knows that the windows are "the eyes of the house", and from how these "eyes" will look, largely depends on the main interior of the room. The Official The dryness of the plastic window The feeling of comfort and heat is being built, and in the house where wooden windows stand this feeling arises by itself, which makes a house with wooden windows crazy comfortable. Company " Windoors.»Produces wooden euro windows for many years. You can not only buy wooden windowsthe company has already ready-made standard sizes, but also to order Eurowindows you need. Quality and warranty are the advantages of wooden Eurocon from the company " Windoors.».