It is difficult to imagine a real Russian bath without a defendant. This place performs several functions at once, protecting the steam from the penetration of cold air, being at the same time a dressing room and a rest room where you can relax after the steam. It is not so difficult to build a pre-order, especially since you can give him your own individual style and make the most convenient for yourself.
Insulation
When the log house is ready, the stove is installed and the steam room is equipped, you can start designing the pre-banner, and you need to start with insulation. This room is a kind of buffer zone, which retains precious warmth in the steam room and is a resting place. Therefore, the pre-banker in the bath should be as warm and comfortable as possible.
Usually, a foil polyethylene or liquid glass is used for the insulation of the walls of the pre-banner. Today, a lot of materials can be found on the market for the insulation of the pre-banner, but one of them is extremely popular due to its low cost and ease of installation - stone wool. It perfectly holds the temperature indoors, it does not allow to break through drafts and does not accumulate condensate. Whatever the insulation you have chosen, it is important that it does not accumulate condensate, otherwise the walls and the sheath will be in disrepair very quickly.
It is also necessary to provide free air circulation, which will also not allow to accumulate condensate. Properly installed ventilation and heating are a pledge of a long life of any bath.
Floor floor
It is possible to equip the floor in the pre-tribbon - it means to create a warm and comfortable room that will serve for many years. What requirements are presented to the floor in such a special room? First of all, it should be warm. Agree, it's not very pleasant to get up on cold boards, leaving the steam room. In addition, such a sharp temperature difference can provoke a cold appearance.
The insulation of the floor should be thought out and taken into account at the stage of building a cut, when the draft floor is mounted. Choose the right materials for the flooring of the floor in the pre-banker is not so easy. It is necessary to understand that the pre-tribbon is a rather specific room with its operational characteristics. So, there will almost always be an increased humidity of the air, because you will enter and leave the steam. Therefore, not only the floor and walls, but even the ceiling in the pre-banker should not be afraid of moisture.
So it becomes clear that for the construction of the floor of the pre-banner, we need a warm durable material that can be in contact with water. The optimal option is to use wood in combination with additional synthetic coatings. So, the flooring can be made of oak or larch, and from above put a special rug that can be easily washed and dried after use.
Pulling Paul concrete in the pre-tribbon is strongly not recommended. Although this material reliably protect the foundation from moisture, it will not provide due insulation. As a result, you will not get anything other than discomfort and health problems.
An important point: Unlike the steam room, where the wood coating is not allowed or paint, there is not such a high temperature and the level of humidity in the pre-tribbon, so the floor can be covered with rubber dyes. Taki paint coped perfectly with the task of rooms with high moisture levels.
Wall decoration
When the floor is laid and insulated, you can begin finishing the walls. Walls in the pre-tribades should be trimmed taking into account the same features of operation. They should keep warm and not afraid of moisture. Despite the fact that the walls in the pre-tribades are not so strongly exposed to moisture, like the floor, it is necessary to seriously approach the selection of tipped boards or wood for the trim cladding. Also, we should not forget about the condensate, which will definitely appear if you do not create ventilation.
What way you will lay the lining - to solve only you. From a technical point of view, only the performance characteristics of the material itself are important. Traditionally, it is put strictly vertically, but if you want to visually lengthen or expand a small pre-banner, you can put it horizontally or diagonally. Also recently, the location of the Vangest is very popular.
The inner walls of the pre-banker can sow wood of any variety - deciduous or conifer. If you want your pool to bring even more benefits, use the lip. It contains healing agents that are allocated under the influence of temperature and have favorably affect health. The same can be said about valuable coniferous rocks, such as cedar.
If you paint the walls, use only water-repellent means that can withstand high temperatures.
In the pre-banker, unlike the steam room should be windows, so during the construction of the walls should take care of this in advance. Some believe that the windows should be big to let the maximum light, others believe that they should be as small as possible and closer to the ceiling so as not to produce heat. Experienced specialists disagree in this matter, so the final decision can only accept you yourself. With due insulation of the walls and when installing good window frames with double glasses, the heat will be saved, even with the window in the entire wall. On the other hand, whether you need such large windows, especially if they go to the road or neighborhood. The door in the pre-tribades should close tightly and do not miss the cold from the street, so any interior designs can not be speech.
Nevertheless, with sufficient natural lighting, it is possible to avoid interactions of the room by moisture. The windows in the pre-tribades should be necessarily also because it must be periodically ventilated.
Interior design
When you have completed all building and finishing work, made a warm and safe room, you need to take care that it becomes also comfortable. The interior design of the pre-banker is the most pleasant and creative part of the construction, to which you can attract my wife and even children. As we have already written above, the pre-banner not only protects against excessive heat loss when leaving the steam room, but is a place to rest. Here you can "cool", read the book, calmly sit on the bench, apply therapeutic masks and creams or drink beer with friends.
Traditionally, the pre-banker is made to make a simple Russian bath style, but today you can meet real masterpieces of designer art. Whatever style you choose, the main thing is to be comfortable in this room. The only thing to remember when choosing the details of the interior and furniture is to be made of materials that are not afraid of moisture.
In this video, the pre-demonstrating prebator is made in a modern style, visually demonstrating how to transform a small room and make it as functional as possible:
Do not use fabric elements of the decor or furniture trim - it is better to replace it with skin or dermatin.
The following interior items must be in the pre-banker:
- sofa and armchairs (or any other furniture on which you can sit and relax);
- table (coffee table or big table for gatherings with friends);
- clothes hanger;
- shelves for bath accessories;
- refrigerator or minibar;
- shelf for shoes.
If desired, and if the room allows, you can organize even a small kitchen with lockers and washing to prepare snacks without leaving the bath.
Finally, we suggest you familiarize yourself with useful advice that will help you make a comfortable and functional prebator with your own hands:
- The correct insulation of the pre-banker is the key to the success of the entire project. Do not save on the insulation, because it will pay off in the near future in any case. A good insulation will save energy to heating and firewood.
- The optimal area of \u200b\u200bthe pre-banker should be calculated from the principle of 1.3 square meters per adult. So you can avoid tightness and discomfort during the rest.
- The optimal amount of the pre-banker, according to experts, is 140x205 square centimeters, but in general the length can be any, the main thing is that the width is at least a meter.
- Do not forget to make bins for coal and firewood, putting a break near the broom to remove litter immediately.
- Take a place for urn to not breed mess in such a small room.
- The technique in the pre-banker is better not to set or position it as far as possible from the entrance to the steam room so that it does not go from the couple.
- If you have so little space at your disposal, that it is impossible to fit on the floor everything you need, make a folding or folding table, the same bench, suspended shelves and other ergonomic solutions.
These recommendations will help you build a convenient and durable pre-banker for any bath on your own. As you can see, strict rules for the construction of the pre-banner does not exist, but should not neglect the elementary requirements of operation. So you can avoid frequent repairs and save a lot of funds.
Start a discussion ...