For romance, the garden is unthinkable without a bridge. He is an excellent supplement of the garden, gives the site a unique flavor.
If there is no real stream on the site, it can be successfully replaced by an artificial, built with pebbles. If you put along his "shores" small 
The most simple in the manufacture of wooden bridges, although concrete, metal and other materials can be applied in their construction. The length of the bridge does not exceed 2.5m, width in the range of 0.8-1 m. Basic parts of the bridge: spans, flooring, racks and railing. Bearing structures must be laid on the foundation (concrete base or piles).
Wooden bridge of simple design is easy to make independently. Somewhat more complicated - arched, slightly curved bridge ("Caprice"). To prepare the prolonged articles of the arched bridge, it is necessary to thoroughly perform the markup of the board with a cross section of at least 50 × 200 mm. The length of the board should be divided by 3.4 or 6 parts - depending on the expected oval of the span. Through the obtained points, the line is perpendicular to the axis of the bar, the points that determine the curvature of the workpiece are affixed on each line. Connecting dots among themselves, we get the outer line of the saw. The surface of the saw must be treated with a reference to get a smooth bend. Such marking must be made from the opposite side of the bar, which also make sawing. As a result, the span struck of the convex form is obtained. After installing the spans using self-tapping and nails, the flooring is attached (boards with a thickness of 25-30 mm). Between the boards leave small gaps - for the drain of rainwater. On the sides of the span structures, the racks of 85-90 cm height are installed, on which the railing is mounted on top. On the side surfaces of the collected bridge, the nearest rakes nourish thin rails, which gives the structure ease, elegacity and attractiveness. For. Wood protection from exposure to moisture, fungi and microorganisms All design details need to be handled by a protective agent.
On a note:
Gas burner WEISHAUPT WG 5
WEISHAUPT WG burner model range corresponds to a modern level of development in the field of fuel combustion. The burner is controlled by electronic burning manager, which makes fuel consumption more economical. Internal burner nodes are designed in such a way that air and fuel control devices are easily accessible to repair and mounting. Plastic case simultaneously performs the functions of protecting internal elements and noiselessness.
Start a discussion ...