How to make an aviary with your own hands. Detailed description of the construction of capital avoire

Any dog \u200b\u200bthat lives year-round on the street, for a comfortable life, a separate place is required. The place should be fenced and is in some privacy, so that the dog does not prevent anything there. Ideally, it should be an aviary, suitable in the size of the dog. In the aviary, it is necessary to become a good-quality booth, which will help to hide from the weather-like fourth defender, determine the place for feeding and be sure to make a canopy from the sun, snow and rain. It is not necessary to buy a finished product at all, as it is not difficult to make an aviary with your own hands.

Content

How to make an aviary for a dog. First stage

What are the types of avians

Before embarking on the construction of an enclosure for a pet, it is necessary to decide which design you would like to see in your yard.
Woliers are:

Temporary. Basically, such buildings are open. The territory is struck by a fence or grid, a booth is installed inside, the flooring and there is no canopy.
Closed. Intermediate structure of the structure. The design has lattice walls, flooring, the booth is installed inside. This type of aviary is considered partially insulated.
Capital. The design has a wall, and at least one of them is mesh, the rest are insulated, the roof and flooring. Inside the booth is installed or part of the enclosure is composed and a sleeping place is equipped there.

What are the enclosures in size

Wolter can be any size - it all depends on how much space you can allocate for construction. If free territory is not so much, then the aviary must be proportionate to the animal that will live in it.

By itself, the aviary can be:

Small.
Middle.
Large.

The Woller Square should be such that your dog can be comfortably moving along it. If your pet is less than 50 centimeters, then it will be enough to crack the size of 6 m². With the growth of the dog 50-65 centimeters, the aviary must be at least 8 m². Dogs, larger than 65 centimeters, should live in a 50 m² escape.

If you plan to contain two or more dogs in the aviary, consider this in construction - increase the area at least one and a half times, and even better - 2 times.

The aviary side should not be less than two meters - this is exactly the distance that the dog will allow the dog to move freely. Of course, this is very little for a full life. Ideally twice a day, and even better - overnight to release a dog to run freely in the yard. If the dog will live in the aviary constantly, then its territory must be more.

How to choose a place for construction

Pick up a place for construction, as to build an aviary is necessary in a convenient place - for you, and for the dog.

Very unsuccessful if you decide to build an aviary behind the house, a garage or for business buildings - the dog will be uncomfortable there, it can behave restlessly, since it will be limited to the viewing of the territory.

Do not place an aviary close to the gate or fence, especially if he is a lattice - the dog will have everyone who passes by, besides, the dog is likely to tease the defortion.

The most successful solution - will install the aviary in the courtyard so that the dog can control the situation, but in order to separate the high fence and at least a few meters of the courtyard from the street.

How to make an aviary for a dog. Preparatory stage

Draw plan

Building a dog house, as well as for people, begins with the project. To begin with, draw the scheme on paper, according to which you will build a design.

Do not forget to draw everything thoroughly. In the aviary must necessarily be:

Place for sleep. It can be a booth, and maybe a full-fledged house.
Place for a walk. Of course, the more - the better. If your dog is all the time to be in the aviary, it is necessary for him to play natural need, as well as a place where you can smash your paws.
Place for food. Ideally, it is necessary to make a window to feed the pet without going into the aviary. Bowls are necessarily two: one for food, the second for water, depending on the growth of the dogs should be placed on the platform.

What to build aviary?

Wolter for a dog can be wooden, wooden with a metal mesh, brick with a metal mesh or completely made of metal. Whatever the option you choose, remember that at least one wall should be deaf - sewn with wood and insulated, and at least one side - lattice, so that the dog see what is happening on the territory entrusted to it.

Wooden enclosure is an area fenced with a fence-stakenist. Most often, such an aviary is built as a temporary design, as it is not durable. A large dog with ease will choose wooden planks, and a medium-sized dog can bother the hole in the fence or to make a subtop.
Wooden Wolter with a metal grid is the most suitable option for the dog content of any size and any breed. At the same time, three or two of its walls should be made of metal, and one or two solid - from the tree. From above, metal walls will need to be sewn to the corner, slats, wooden boards - at the same time they must be soaked with a special solution.
The brick aviary with a metal grid is built by the type of wooden. There must also be two or three walls of bricks and one or two from metal.
Metal encloser is also not the best option, as the dog will be cold in it: there is no protection against wind.

Tips for the construction of aviary

Waller walls preferably inspire, for this they need to be seized with thermal insulating materials, such as foam, eco-plastic, etc.
Metal grille - Rabita is not the best option for aviary, as it has the property to be saved if the animal will rely on the grid. In addition, there is a risk of a dog to get injury.
In the event that you use welding during the construction of the aviary, very carefully and carefully check all the seams - a large strong dog will be able to quickly knock some part of the design.
If you decide to make the lattice Waiter Walls, then keep in mind that the size between the rods must correspond to the size of the dog - place them with an interval from 5 to 10 centimeters.
After the aviary is built, carefully examine it inside so that there are no sticking nails, bitch and burrs who can injure your pet.
Instead of nails during the construction of an enclosure for a dog, it is best to use screws, screws, screws and bolts.
The door to the aviary should be opened inside the room.
The shutter on the door should be both outside and inside the aviary.
Make ordinary eyes on the doors, they can be used if the shutter breaks down: Hang a regular mounted lock.
Getting Started for the construction of the roof, remember that the most important thing is a good rafter system.
The roof of the overhaul can be made of slate, metal tile and professional sheet.
Be sure to make a soft roof, since the dogs have a very high sensitivity of the ears, and during a strong rain or hail the dog will experience a strong auditory load, which can lead to stress.
Make the roof of the enclosure with the slope so that the precipitates do not delay it.
Be sure to under the aviary, it is necessary to make a foundation or foundation so that the bottom does not hesitate and did not bother. In addition, thanks to the hill on which the aviary is worth, there will be a kind of ventilation - it will save from the shaft smell in the aviary.
Paul is desirable to do with a small bias, which will make it easier to clean the aviary.
For the floor you can use wood, asphalt or concrete. Concrete floor is located on top of a wooden infusion.

What materials are needed

For the construction of capital aviary for dogs, you will need the following building materials:

Sand.
Cement.
Boards.
Metal profile.
Corner.
Channel.
Rods.
Profiter.
Roof material.

How to make an aviary for a dog. Stages of construction

Foundation for Waller

The easiest option, ideal for aviary, is a ribbon foundation. Made it as follows:

Dig a trench with a depth of 50 cm.
Make a simple formwork height of 20 cm.
Pour the gravel layer first.
Prepare a conventional solution - from cement, sand and water.
Pour the solution.
After the solution is freezing, put waterproofing (even a polyethylene film is suitable, but you can take rooferoids). Thanks to this, the metallic elements of the aviary is not terrible corrosion, and the tree is a fungus.

Floor for aviary

It is better to work a little bit, but to make a high-quality floor, because thanks to the design it will have a very long time. So, the floor is made complex - using several layers.

For the foundation to lay a chapeller.
Cook a rectangle from shlisheller.
Inside the rectangle to be shaped by boards.
Processing boards by antiseptic.
Singing any insulating material, for example, rubberoid.
Make a gravel intake.
Pour concrete.
After some time, when the solution freezes half, drown in it wooden lags.
On top of laying the usual wooden floor - all fasten the self-drawing so that the pet does not hurt the paw.

Between the floor and the ground will remain a short distance - centimeters 15, no more. Due to this, under the aviary there will be a good air circulation, which will allow you to quickly evaporate moisture.

Specialists also advise the floor for about 2 degrees to tilt towards the door - it will facilitate cleaning.

Walls for aviary

Waller walls can be made of any metal material. But for a large dog, a chain mesh is not suitable for a large dog, because it can stretch under the pressure under pressure, otherwise to tear away. In addition, during jumps, the dog can injure injury. Yes, and racial rattles strongly.

You can use building grids for enclosure - they are still used as fittings.

Minus construction grids - it is necessary to weld, and the cooking seams are sometimes not very strong and often diverge.

But the best option to help make an aviary and reliable, and safe for pets.

Profile pipe in every corner to weld or fasten the bolts to the chapeller. Thus, bringing the carrying structures.
The bar pave in the aviary from the corner to the corner. So that everything is perfectly smoothly, horizontal need to check the level.
Vertical rods fasten, checking the evenness of a plumb. The distance between the rods should be from 5 to 10 centimeters - it all depends on the size of the animal.
Separately manufactured the door - it is necessary to leave the opening in the welded frame.
Do not forget that square rods are tougher than round.

Wall sheathing Waller

You can shelter three, two or one Waller wall. Outside the aviary is trimmed by any material that you have and which you like. Inside the wall must be inspired. For these purposes, foam, minvat, etc. will fit. From the inside the Waller Wall is trimmed with wood.

Roof ring

The roof of the Woller should be smooth, but it is desirable to do it with a slight bias.

On top around the perimeter, it is necessary to secure the professional or corner - it is necessary for a ligament.
In order for the design to be more rigid, on the side walls in the center from one to another wall it is necessary to install a chaserler.
At the resulting frame to attach the board, the thickness of 5 centimeters is desirable.
On top to cover with slate or tradelates.

Installation of a soft roof is desirable, as it will help create less noise.

Booth for dogs

In the aviary you need to install either a booth or make a full-fledged dog house.

Booth is made of wood. In order for the booth to fit for your dog, it is necessary to calculate its size, leaning on the dimensions of the dog.

The dog is growing up to 50 cm - the size of the booth 50x70x60 cm.
The dog is 50-65 cm in 50-65 cm - 80x1.2x80 cm.
The dog is over 65 cm in size - the size of the booth 100x140x100 cm.

In order to correctly calculate the size of the entrance to the booth - LAZ, it is necessary to measure the width of the chest pet and add 7-10 centimeters.

For the construction of the booth, a board is needed - 25 mm and a 4x4 cm timing. Booth is built as follows:

Make a frame from a bar, strengthen it with ribbies, and, both transverse and vertical.
Immediately leave a place for Laza.
To put the bottom of the booth.
Sew buddha walls.
It is advisable to make a roof to make a removable - folding so that you can get inside for cleaning. The roof shape is unimportant: it can be flat so that the pet can be climbing on it, or a double.
Outside the wall of the booth to impregnate with oil.
Lases can be curtained with a piece of cloth, tarpaulin, foam rubber.

You can build a full-fledged house for a dog in the aviary - for this it is necessary to freeze part of the enclosure and make a separate entrance to it and for the dog, and for a person. In such a house you can make even a window. In addition, this room can be tired.

Make separate frames so that there is an internal and outdoor skin.
Attach them with bolts.
In the summer, all this jumble can be removed.

Feeder for dog

You can prudently build a peculiar feeder that will help in feeding. For this you need:

In the lattice to do a folding window, which, in case you can locate. Its size depends on the dimensions of the dog.
Thanks to the turning mechanism, you can open the window, and secure with the help of rings holders.
Miles with food and water are inserted into the rings.
If you close the window, bowls are in the aviary.