Woodrovnik: photo ideas, step-by-step master class. How to make a woodwood with your own hands. Possible options for the woodwood, manufacturing process from A to Z.

The presence of a private house or even cottages necessarily means periodic picnics in the fresh air. And what picnic can pass without a juicy and tasty kebab? But for its preparation you always need to have firewood in order not to run and not look for them at the last moment. Firewood, in turn, must have a suitable place for storage. Therefore, we suggest discussing the issue of creating your woodwood.

Content

Likbez and preparation

Before you decide to buy a wobbler, or make it my own, you need to understand the question, for which such equipment is needed.

Purpose of Warrovnik

You live in a private house or own the cottage, and the firewood is always needed there. And the point is not even that the heating system may not be perfect enough, and you want to periodically fill the house with firewood, everything is different. Of the most common firewood applications, the following can be noted:

cooking kebab;
heating at home with a fireplace;
use in the bath.

But since we always surprise weather conditions with our surprise and variability, just so in the open sky to store firewood is not recommended. Any wood requires the right approach to storage. Here is a conversation and concerns wobbies for the first time. After all, this is an excellent structure for storing firewood in perfect order at any time of the year and with all weather conditions.

Of course, any of us can quickly sketch wooden pallets or partitions, so that at least somehow hide firewood from snow and rain, but is it?

Each owner knows that in the courtyard of the house or at the cottage everything should be perfect, right, it is aesthetically written, and the woodwood is not an exception. And with the right approach, viewing various options, the wrapping can become not just a device for rational storage of resources, but also a real decoration for any yard.

Select options

In order to determine what sizes you need a Wrong, you need to repel directly from how much ready-made firewood you have. Naturally, you need to make a structure with a margin, because you can not know how much you will have such a wooden fuel tomorrow.

In addition, the dimensions can be calculated and otherwise, based on the number of building materials available. After all, there are always building materials from a good owner, and if you have gathered to do the woodwood with your own hands, it can always be collected from existing materials.

When choosing an option for the future Woodrovnik, you need to be repelled from several conditions that are almost mandatory:

firewood requires natural ventilation;
sunlight falling destroys the structure of the tree, which is why it is quickly burning;
lights of the lanes in the woodwood should be securely fixed.

Any such structure, despite being it will be an extension to the house, or separately standing, should have a roof. At the same time, the roof should be longer than the area of \u200b\u200bthe structure. This is due to the protection against water and snow, which may well get on the wood if the roof is not large enough. It will not be superfluous to provide a special drainage in the drafts of the woodwood, and make the roof under the slope.

If you decide to make a structure for storing wood with an extension to your home, it is recommended to add it from the northern side of the housing. So you kill, as they say, two hares, because they will warm the main building.

If your choice is a detached building, there are also interesting options here. That's what you can choose:

Construction with roof and three walls.
Gazebo with the door.
A real barn.

Speaking about the barn, it is worth noting that such a woven is ideal not only for storing wood fuel, but also for maintaining various gardening inventory and even tools.

By the way, you can also think about the presence of small woodcuts. These are such small firewood tools that resemble peculiar urns. Such an elegant accessory, however, will make it difficult to do. Fortunately, it is cheap, and they will be simply indispensable in the farm.

Necessary materials

It is easy to guess that for the construction of a woodlover on its land plot, it is best to use a tree. But if you are somewhat constrained in this material, other leafy materials can be used for roofs and walls.

But consider one important moment: it is not recommended to use the metal, because you risks the effect of the oven in the woodlover, which adversely affect wood stored inside the construction.

Also, keep in mind and the presence of lumen in the woodwood. Do not trim it from all sides completely. For firewood, the correct ventilation plays a very important role.

Capturing the roof, you can take:

slate;
polycarbonate;
wood;
remains of building materials after repair or construction.

Acquisition of a finished woodwood

If suddenly you have no desire to personally create a storage for firewood on your land plot, you can always buy a finished building. But it is worth noting that such pleasure is not particularly cheap. For such a building you will have to put on average about 1 thousand dollars. It is possible to find such goods even on the Internet, while having examined the photo of the Woodrovniks, finally decide on the model you like.

Making the Woodrovnik do it yourself

Well, if the purchase of a finished product is not a solution for you, and you want to do everything yourself, we will analyze the details of the upcoming procedures.

Stages of construction

Since the woodwood cannot be called particularly difficult to build a building, there are only a few stages necessary for implementation. Here they are:

In the quality of the supports, the logs are used, which must be deepen on 25 centimeters to the ground. After that, they are concreted or recorded with the help of a boob stone. Before entering the logs, their ends must be treated with special antiseptics, then separated by the rubberoid.
The next step is to consolidate transverse logs. In their quality, you can use boards or rails, the diameter of which will be smaller than the diameter of the supports.
At the end of the described work, you need to take the collection of the rafted roof. You will need to lay 3 boards on support logs, and on top to these boards, add transverse boards in the amount of 5 pieces.
As a result, the resulting roof must be seen by carbonate. Although slate is work perfectly.

Watches adjacent to the wall

If you decide to build a woodwood in the country, which will adjust the side to a nearby building, here work is practically no different.

It is only necessary to remember that if it provides for a solid trim, small gaps should be prepared. They will play the ventilation function. By the way, if the rails are located very rarely, you can even use the mesh to cover the facilities around the side.

The roof can be covered with any of the available roofing materials. Do not forget only that it should be located under the tilt to provide a sufficient angle for the right drainage.

Nuances in the construction of the Woodrovnik

There are also some nuances that do not forget about. We list them:

in addition to having a slope for water drain, for the roof of the woven must necessarily be correctly calculated. She simply obliged to perform for the area of \u200b\u200bthe Woodrovnik about 20 centimeters;
it is worth remembering about the presence of the floor. Without such an important element, the wrapping can suffer from moisture, which is quite capable of getting there. The presence of a floor will provide you with natural air convection and the complete safety of firewood;
all wooden elements that will be used during the construction of the Woodrovnik must necessarily be treated with special means to avoid rotting, fungus, as well as insect influences.

Photo idea

In order to inspire you to create a suitable woven not only in its functional capabilities, but also visual characteristics, we suggest to consider some photo ideas of the woodwood in the country.

Woodrovnik from rabbit

Almost all people know what a rabbit is, and many even have it in the country. It is possible that he is old and inconsolable. But now the news, you can make a small woodwood out of it. It does not need much time and effort. All you need to do:

Remove the doors and grids that may be present in the design of the rabbit.
The roof must be strengthened and prevalent if it is necessary.
Vulnerable plots of the new Woodrovnik can be separated by a metal grid or provide a metal frame strengthening there.

Such a woven will not be very compatible, but it is definitely suitable for a small cottage where you prefer from time to time to come to rest.

Woodrovnik from pallets

Many of us have repeatedly seen old pallets. Such can be found even just on the street. But this is what is entertaining, from those can be equipped with a very high-quality woodwood.

It is very interesting that it is from the pallets that the Woodrovnik will be released truly high-quality, and it is practically not necessary to spend strength for its structure. Everything is almost ready. You only need:

Collect out five pallets cube without one face.
Build a waterproof roof.

Such a wreck will be fully ventilated due to the design of standard pallets, and it is possible to put an either a solid oilcloth or rubberoid to the roof.

Portable woodwood

If you want to have such a woodwood that can always be lowered to the fire, put in the right place, in a small distance from the place of the picnic, you can make it from the barrel.

Naturally, we mean not such an iron barrel that is used everywhere today, but an old tree barrel.

But in order to make such a product, you need to calculate everything well. We carry out the manufacture as follows:

Do all the necessary measurements and apply the contours of the woods with chalk on the barrel.
On any barrel there is a hoop that restrain the riveting. It must be moved to the center of the barrel to the place where the handle of the woodlover will eventually be provided. For this you need a hammer.
Drill in the hoop and in riveting holes for fastening.
Secure the hoop in a new place with the help of the corresponding size bolts.
Take the jigsaw and try to carefully cut the woodcut on the contours predetermined in advance. It is best that the electrolybiz is suitable, since with mechanical you will have to seriously sweat.
Treat all edges of the skin in order not to leave any irregularities or bursavar.
Take a solid board and make legs out of it, as well as a stand for the woodwood. Try to work well at this stage, so that the stand is furious and really beautiful.
Cover the handle from the paint barrel hoop for metal.
Cover all Wooden Details of the Woodrovnik Morilka.

Another option with barrels

If it happened so that in your location there is not one and not two wooden barrels, you can make some of them some other woodwood. Moreover, it will be done even easier than the previous option.

To do this, you only need to knock out one of the bottoms of the barrels and gently fold them on each other. Firewood will be placed in the barrels themselves.

Wheel Roller

The next idea of \u200b\u200bthe Woodrovnik is suitable for those people who do not even want to spend their strength to create an original woodwood. But at the same time, who do not want to buy a ready-made version in stores.

If you have free rings after you have been engaged in the arrangement of the well on your site, they can be put into the course of creating a woodwood.

For this ring you just need to put on a crushed stone or a concrete pillow so that they cannot move.

Such rings can be connected to each other, or even create a whole design of the rings installed on each other. To do this, you will need anchor bolts that reliably secure the design.

Secure the work done will need to be quickly treated with the inner surface of the rings using antiseptic drugs.

Making a Woodrovnik - Video

As always, at the end of our conversation, we suggest viewing a training video about how to make a woodwood with your own hands. In this video, possible options that can be suitable in your case will be considered in detail. Also here will be offered ideas that are quite realistic to translate with their own hands. Enjoy.