Modern parquet is a product of innovative technologies, thanks to which it has become more affordable by price, not at all losing quality indicators.
The Tarkett trademark has become the first manufacturer of a three-layer parquet board coated with a veneer made of natural wood. In addition to the high wear-resistant surface protected by high-quality varnish, a new generation parquet is popular due to the ease of installation.
Laying the Tarkett parquet board does not represent difficulties even for non-cellional due to the T-LOCK lock, not requiring glue. The delicless method is characterized by simplicity, speed, strength and possibility of operational disassembly.
As stacked Parquet board TARKETT:
1. Parquets are laid under the condition of maintaining the temperature in the room of about 22 degrees and humidity not more than 60%. Packet Parquet maintained in a room for at least three days.
2. The base should be predetermined and covered with an absolutely dried aligning mixture.
3. The concrete basis is lined with a waterproofing film with an overlap 20 cm, sinking the joints of the scotch.
3. Along the perimeter of the walls, wedges are set up to 10 mm in size, providing a gap for temperature extensions.
4. Installation of parquet is made from left to right. At the boards of the initial strip spill the ledge of the groove. These edges they go to the wall. Docking begins with end surfaces. The final bar of the first strip is put on the row opposite the ridge of the previous one, mark the drawing line. Submission to the bar, it is connected to the end of the penultimate.
5. Cut the board opens a further strip if it is not shorter than fifty centimeters. Its comb is inserted into the groove of the initial strip, not omit. The end surfaces of the second board and the segment are combined, pressed on the long edge to enter the ridge in the groove. So continue until the end of the strip. The formed flat module is pressed to the base, the lock is snapped, the butt lines are aligned.
6. To accelerate the installation of the board, collected in modules on the floor, closed their ends. After that, the assembled module is deposited to the previously laid band and connects to it. Must be observed chess order of laying with a minimum step of fifty centimeters.
7. The final strip is equal in width and trimmed with the maintenance of the temperature gap. If you do not need to cut it, simply cut the ridges. The final strip must have a minimum width of 5 cm, otherwise the first strip is required. The laying of the Tarkett parquet board is completed by mounting the plinths.
The beauty of parquet and its modular format is a distinctive feature of the modern flooring.
Start a discussion ...