Build a greenhouse from polycarbonate.

Many dackets are accustomed to growing an open-air vegetables. However, in mind enhanced humidity in foggy or rainy weather, phytofluoric and other fungal diseases may occur on the fruits.

As a result, the harvest dies, and all efforts on its cultivation turn out to be in vain. In order to protect plants from malicious effects, they must be grown in a greenhouse, assembled on the basis of transparent sheets of polycarbonate, the main thing is to know where to buy polycarbonate at a low price and good quality.
What moments you want to pay attention when buying.
Following the basic meaning of the well-known phrase that even a very wealthy person can ruin the purchase of cheap things, one should not be purchased, the framework of which is made of plastic. This product does not have durability and after a couple of years there will be a need to buy a new design. The frame must be metallic, its mid arc is double. This will allow the design to withstand a significant mass of snow on the roof. It is desirable that loops are widged on the doors. If the loops are supplied complied separately, during the assembly of the design you have to hire a welder to install them.
The order of assembly.
The assembly of the greenhouse of polycarbonate does not represent any difficulty if the process is carried out in accordance with the scheme attached to the product.
First of all, you need to choose a solar place and thoroughly align the surface of the land.
Before assembling the design, it is necessary to prepare a base. To do this, around the perimeter of the future greenhouse, you need to lay a row of bricks and cover them with plastic or metal.
Installation of the design begins with the assembly of the end sides. Next, the assembled end sides must be crushed by polycarbonate.

At the next stage, the assembled end sides are installed on the place intended for them and be bonded with each other the upper cross-two and two lower lateral cross. Next, intermediate arches are attached to the cross. During the assembly of the design, the accuracy of installing its elements must be checked by the mounting coal and the construction level.
After the metal structure is assembled, proceed to it with transparent polycarbonate sheets. Polycarbonate sheets must be placed on each other with a small adhesive. Such a location excludes ingestion of the greenhouse of water during the rain.
It is possible that during the assembly, the colorful coating of metal structures in some places will be broken. Therefore, to exclude the likelihood of the destructive effects of corrosion, at the end of the process, it is necessary to cut damaged places.