PVC film for pond: choice and use

The presence of an artificial reservoir in its cozy courtyard is a wonderful opportunity to enjoy his beauty all year round. Much more pleasant to spend time with relatives and friends, sitting at a pure pond with a mirror driver, or sunbathing in a sunshine at the home pool. But in order to obtain this aesthetic pleasure longer, it is necessary to care for the reservoir properly, in time to carry out restoration works, and before the construction of the design, it is to carry out the correct calculations of the drawings. The choice of a place for a homepage is half of the case, it is equally important to determine the design and reliable insulating materials. In this case, we are talking about a polyvinyl chloride film for ponds.

Description of material

The main purpose of the PVC film is a qualitative solution to the problems of waterproofing by retention of water in an artificial reservoir and preventing it in the ground. In the last century, in the absence of such insulating materials, people used clay, which restrained water a little. Only here is the material this in itself is fragile and very dirty. And when drought also cracks.

Today, polymers came to replace natural gifts, of which you can choose any film for waterproofing the pool.

Figuratively speaking, PVC film for a pond is a kind of membrane barrier that holds water within the water branch. You should choose this material, taking into account the depth of the pond and the main goals it should be performed. Modern waterproof films on the market are presented in a wide range and have high strength.

If you plan to organize an artificial pond on your summer cottage with a natural reservoir imitation, choose a film under the color of the soil. Thus, the bottom and walls of dark shades will create a mirror effect: running clouds, blue sky and trees will be reflected on the surface of the water.

Preparatory work on the waterproofing of the pond or the pool is not burdensome and are quite accessible to the fulfillment by one person. First, it is preparing a rigging suitable size. Then the bottom and strengthened the descents.

After that, placing a polyvinyl chloride film directly on the bottom of the decorative reservoir of the Vansel. The PVC thickness of the coating is approximately 0.8 mm, and due to the presence of a dense polyester thread, the film becomes very strong. Separate paved pieces of coating are bonded between themselves with a waterproof adhesive, purchased in a construction store. Durable seam of polyvinyl chloride flooring also guarantees hot welding.

To have an idea of \u200b\u200bwhat PVC film represents, pay attention to the photo below.

Technical parameters of PVC films:

• weight 1 M. ² - from 600 to 900 g;
• thickness - from 0.5 to 1.2 mm;
• elasticity - more than 150%;
• resistance to mechanical damage;
• able to withstand temperatures up to -500s, resistant to temperature differences;
• withstands 2 coup loads;
• warranty service life - at least 15 years;
• price for 1 m ² ultralong film - from 150 r., For 1 m ² superproof - from 200 p.

Types of film

Types of film for waterproofing of the reservoir:

1. Polyvinyl chloride. PVC film in its basic characteristics is high-quality and elastic, has high waterproofing properties. The term of its quality work is 15 years old, and the tensile strength is more than 135 kg per 1 m ². The material is based on vinyl chloride, which is a gas containing chloride compounds in large quantities. In its pure form, these compounds are toxicly dangerous for the human body, however, in the form of finished materials, their harm is minimized. Despite this, in the pond with waterproofing from polyvinyl chloride it is not recommended to breed fish. Chlorine is released from the film, mixed with other compounds and gases in water, and then absorbed by fish. The prolonged effect of chlorine is destructively reflected in the inhabitants of the reservoir. The film for pools and ponds from polyvinyl chloride is simple, reinforced and enhanced synthetic polyamides. In order for the film not to be damaged by plant roots and stones, a special woven fabric is under it - Geecan. With a reservoir area from 5 to 15 m ² With a depth of less than 1 m, it is better to use PVC film with a thickness of 0.5 mm. Deeper and large reservoirs require waterproofing film at least 1 mm. It is not subject to use in reservoirs with sharp angles.
2. Butyl accepted film is used in conditions of large and bulk pools and ponds, a depth of 1.5 meters. It is a special purpose rubber and in its composition resembles synthetic rubber. This material is resistant to 40-degree frost, and 80 degree heat, so the installation of such a film can be carried out at any time of the year. It is well stretched and cuts.

How to choose a PVC film for a pond

Choosing a waterproofing film, you should know the exact parameters of your reservoir: its depth and size. It is important to take into account the conditions under which it will be used. That is, than a rougher and bumpy soil, in which the pond will be placed, the stronger and thicker should be waterproofing. It is also necessary to proceed from the main functional duties assigned to the future reservoir. Want to breed fish? Then take one type of film. For swimming - the other is suitable. Deciding with the purpose of the reservoir, it is necessary to choose a reliable waterproof film. It easily takes the necessary shape due to high strength and flexibility. High-quality polyvinyl chloride is resistant to damage, heat-resistant and is able to withstand a critical minus and positive temperature. And therefore, water from the pond or pool can not be merged for the winter.

Buy PVC film for the pond can be in a specialized store. Externally, it is a roll of 15 to 25m long, which, when performing installation work, it is necessary to glue with a special adhesive substance. The greater the width of the film - the shorter its length.

A high-quality polyvinyl chloride film must meet the following parameters:

• frost resistance;
• moisture resistance;
• the absence of toxic elements in its composition;
• simplicity and ease of operation;
• softness and elasticity;
• lack of special protection from weather conditions.

When buying a product, take into account such moments:

• presence of a warranty check;
• availability of delivery services;
• availability of certificates confirming the quality of the goods;
• compliance with the technological requirements of production;
• the authenticity of the goods;
• lack of marriage.

With a fake when buying PVC film faces a high percentage of buyers. For example, in the absence of relevant documentation and invoices, you can purchase goods of completely different quality. In addition, any self-respecting trading network should ensure the delivery of rather heavy and volumetric rolls with a film.

In order to avoid such trouble, it is necessary to accommodately approach the purchase of goods and acquire it from proven suppliers.

PVC film for a pond from German manufacturers OASE and Heissner, as well as the Canadian film Geenflex for the price ranges from 125 to 250 rubles. Waterproof waterproofing has the following abilities:

• elasticity;
• high strength;
• flexibility;
• frost resistance, thanks to which it can be worked in winter;
• long service life.

Advantages of PVC film for pond and swimming pool

Special film cover provides:

• reliable defense of soil from blur;
• gives the shape of the water and retains it for a long time;
• does not allow water leaks and education;
• makes it easier to clean the reservoir;
• it is environmentally friendly for the inhabitants of an artificial pond.

In the aggregate of its technical characteristics and properties of the PVC coating, the film for the pond has additional advantages:

1. Affordable price.
2. There is a palette of various color shades for every taste.
3. Long service life.
4. It has high paropropusk properties.
5. Subject to additional decorative finish.
6. With her just work.
7. Wear-resistant.
8. A successful combination of high quality and acceptable cost.

PVC manufacturers for pond

The practical waterproofing film for the reservoir is quite profitable for the price of goods. In turn, it is elite and publicly available. In the first case, the coating is made under the simulation of natural stone and other materials. The price of such a film is usually from 700r per 1 m ².

One of the highest quality waterproofing materials for use in the pools is Italian films. Their price begins from 150r per 1 m ².

The German PVC materials developers make several variants of a polyvinyl chloride coating with a double margin of strength capable of withstanding maximum loads. The price of such materials varies from 200r.

Decent competition to the Germans in the waterproofing market is American manufacturers who export their product to many dozens of countries in the world. Warranty period of PVC US films - up to 50 years, and their price is from 250 p.

PVC film for pond. Video