Tree simulator: features and application

Many under the verses understand the liquid with which it is possible to give wood a certain brown tint. Although, in fact, this mixture "knows" much more. Modern production can be used to dye wood almost in any color. In addition, they are very good antiseptics, thanks to which the life of wooden products increases. So, in this article we will analyze the varieties and properties of the vessel for wood. This will fully for you to reveal their capabilities.

Types of mixes

All modern simulators, depending on the basis, can be divided into the following groups:

1. Alcohol.
2. Oil.
3. Water.
4. Acrylic.
5. Wax.

The most common artworks for wood water can be considered. Such a impregnation material on sale can be both in finished form and in powder, which is necessary for the preparation to dissolve in water. With this mixture, you can paint wood in almost any color. Such material has one disputed property - the fibers of the tree are raised when impregnation. Because of this, wood becomes more susceptible to moisture. Although the appearance due to the underlined structure becomes much better. To avoid lifting the fibers, you can do the following:

1. Lightly wet the surface of the wood.
2. Give a little to stand.
3. Then to open.
4. After that, you can safely cover the surface by the veil.

Morida alcohol for wood is an aniline dye solution in denaturate. This mixture group is also made in the finished form and in powder. To apply this material, manual or pneumatic paint is usually used. Manually get a uniform color with such a verse almost impossible. The disadvantages include what it dries quickly.

The composition based on oil allows you to mix different dyes in oils. Thanks to this wood, you can give almost any shade. This type of vehicle is usually divorced by solvent "White Spirit". The advantages of the mixture include the following:

1. She is unpretentious.
2. Quickly dry dry.
3. Easy and evenly applied.
4. Does not raise wood fibers.

Also distinguished acrylic and wax storm. These modern types of mixtures do not have drawbacks that were described above. Their main characteristics:

1. They do not raise wood fibers.
2. A moisture protective film is formed on the surface.
3. Wood is painted without spots.
4. Well emphasize the structure of the tree.
5. Such verses can have any colors.

Only it is not necessary to forget to cover after the simulatory wood varnish.

There are still so-called morons gels. They are very thick mixtures and are suitable for inhomogeneous and soft wood. This material makes it possible to significantly lower the spottedness of the covered surfaces. But for this, such a veil when coating the surface should be thoroughly smeared until the layer of the same thickness is obtained. For applying, it is best to use special tampons, because Tassel is quite difficult to do it.

Tree simulator: Photo

Tree simile to buy today is easy. Each construction store has a wide range of different mixtures. You can choose any kind of wood veil. The price of this material on average is 60-90 rubles.

How to pick up a veil

First of all, it is worth trying to apply a moron on a small piece of wood. This will allow you to take into account all the features of the coating. If it is not possible to carry out such a test, then before purchasing the mixture you need to pay attention to the following:

1. On the name of the color of the veil, which is indicated by the manufacturer. It must comply with international classification. At the same time, various manufacturers may indicate the same color cipher, although in fact the shade will be different. Therefore, if you need to cover the large area of \u200b\u200bthe mourn, it is recommended to choose all the mixtures of one manufacturer.
2. It is still worth knowing that the quality of the verse depends on how wood covered with it will look like. It should be understood that the same tree of wood can have different natural defects depending on climatic conditions. They, in turn, after covering the veil can give various shades.
3. It is believed that the lower the density of the mixture, the more it is absorbed into the material. This leads to the fact that softwood is the final color is less saturated.
4. Morilka usually makes darker texture tight sections. Soft color will be a little lighter. Therefore, the mixture should be used very carefully. After all, carelessness can spoil everything.

The subtleties of the applix of the veil do it yourself

When processing wood, the verse must take into account several factors:

1. So, choosing a way of covering the surface with the surface, it is necessary to take into account its area. Depending on this, the simulator can be applied to a foam tampon, brush or sprayer.
2. The method of applying also affects the type of mixture. For example, solvent-based nitrometers should be applied only with a sprayer. Moreover, regardless of the area of \u200b\u200bthe treated surface. The fact is that such a material when applying in another way dries too quickly, with the result that stains may appear.
3. In other cases, the choice of tool for applying the veil mainly depends on the area of \u200b\u200bthe surface being processed. Obviously, a large amount with a tampon or brush will be covered very difficult.

As a verse to cover a tree:

1. In order to know how to apply a storm for a tree, you need to assimilate that it is necessary to cover the surface at least two layers. Moreover, in order to apply the following layer, you need to wait until the previous one dries.
2. Before covering the surface with varnish, it should also be waited until the last layer of the veil is dry.
3. Before applying the simulation, wood should be prepared. First of all, there should be no coating on the surface. It is best to apply a veil on a new board. If the coating is available, it should be removed by grinding that you need to do along the tree fibers. In any case, to open all the pores before applying, the surface of the skin No. 1880-230 will have to be treated.
4. Main works will need to be performed in half an hour while the pores of the wood are open.

Defectal elimination rules:

1. If defects appeared when applied, they will have to try to eliminate them. So, on wood irregularities can be smoothed with the help of sandpaper. It is used to remove the upper damaged layer. It is important that there are no sharp transitions between the protected and unprotected area. To do this, it is necessary to gradually change the force of pressing as the defect is removed. Fully flaw is unlikely to be able to fix. However, after such a procedure, it will become less noticeable.
2. If the defect was formed on the surface of FC plywood, then to eliminate it will have to remove the top veneer or completely repaint the surface with opaque paints. In some cases, it is recommended to pre-cover with wood with special impregnations that will not allow the veil too deep into the material.

Multicolored painting

People who are poorly familiar with the verse do not know that one surface can be covered with various shades material. For example, to obtain such a coloring, like the "bleached oak", you first need to cover the surface with a white vehicle based surface (timber bleach). When this layer is driving, all the fots and pores in the structure of the tree are filled with an oil-based mixture with a solid wax content that these pores are clogged. As a result, they become black or gray. At the same time, the rest of the surface that was previously covered with a white mourn, does not change its color.

Morilka for wood (material color and mixing rules):

1. To mix the mixtures of various species and colors, the most important thing is to understand that initially the verse should be covered with all the wood. This will create the main background for the surface. Only after that the material of another color is applied, painting wood structure.
2. In addition, it is not necessary to forget that after applying the last layer, the surface of the lacquer should be covered. This will protect the wood from the deformation.
3. So, the same veil after applying to different woods usually has a different color saturation. Even in shades will be noticeable differences. You should not blame the manufacturer if the color turned out to be not as expected. After all, no one can predict all the nuances of your work.
4. The final surface of the surface depends on the following factors:

• natural shade of material;
• density;
• wood texture.

Using Rustic Beitsa

Specifications:

1. When developing rustic simulators, modern design features of the arrangement and processing of wood floors were taken into account. The mixture is suitable for rustic aesthetics of wooden floors when using conventional materials.
2. Due to this material you can give the surface of a natural wood structure. It looks particularly good if you treat such a verse oak floor.
3. With the help of Rustic Beat, it can be done so that the wooden coating has several color shades.

Such a mixture is on sale already in the finished form. Therefore, you can use it immediately after purchase. It is applied as follows:

1. First polish the wooden floor so that half an hour in the wood all the pores opened.
2. Then you should shake the jar with the mourn, open and apply it to the surface. It is best to do with a brush with a natural pile.
3. After applying, the mixture will be held on all wood channels and pores. Consider, the composition should lie on the wooden surface as soon as possible and at the same time, without leaving the stains.
4. After applying, it is necessary to make finishing processing, which will further facilitate the subsequent care for the wooden floor.