Commube for pigs.

Commasho for pigs

A durable, durable and comfortable feeder for pigs is easy to make from an ordinary gas cylinder. I already made not one such. And they serve for more than 20 years, which you can not tell about the troughs of the tree. After all, the one who grows pigs knows that the wooden feeding bag is enough for one year, no more.

For the manufacture of a feeder, first from the cylinder you need to drain condensate. To do this, in a safe place where there is no open fire, I put the balloon up the bottom. Removing the key crane. Then return the cylinder to its original position, fill it with water, close. Cutting it with a saw with a bulgarian starts from above, then put on the side and continue on the welding seam to the bottom. Cut the cylinder on the other side is more convenient without water.
If you "share" a balloon along the axis, two identical feeders will work. If their ends are cut on one side and weld among themselves in this place, it turns out a feeder with a length of 140 cm. The cylinder can also be cut into two unequal parts: one - for a feeder with a volume of 3 buckets, and the second - smaller, for piglets.
Before attaching a trough to the floor in a pigsty, slightly tilting it along the axis, then the sides welding two corners (50 × 50) 30 cm long with holes for nails. The sharp edge of the feeder is cleaned, so as not to damage the hands and not harm animals.