Fabric rolets today are quite popular thanks to compactness and ease of use. This article discusses the assembly technology, as well as fastening the tissue rod, but before you recommend that you familiarize yourself with the rates for them, here are the fabric rolets of Kiev.
To begin with, deploy packaging and make sure that all component elements, such as chain limiters, self-tapping screws and insertions in the brackets. Then you need to assemble the rod, placing all the inserts into the brackets and connect them with the shaft. After that, spill the cloth and attach the collected ripper to the place of the alleged attachment.
The fabric should evenly overlap the head in both sides. After that, you should fix the bracket without control without control and, holding a bracket with hand to unwind and wind the tissue. If the fabric in the process is shifted to adjust the horizontal of the arrangement of the Roleto, for this slightly raise and lower the bracket with the control. After the roller is adjusted, that is, the fabric will not shift the bracket with the help of self-tapping screws, pre-running the hole for fastening.
After the bracket can be enshrined to the final stage of the installation, namely, to regulate the height of the chain and the placement of lower limiters and lifting. If the chain is quite long it can be shortened, while removing the connector, which consists of 2 halves with recesses intended for the chain links. And another advice in the rod system, it is not necessary to set the upper extreme position, as the loader will not pass under the shaft of Rolets, but to stay at the border. And the lower position can be set using special limiters that are on the chain. For ease of use on a chain, as a rule, a plumb is installed.
Watch the video on the assembly and installation of fabric rollers:
Also during the opening of the window to the ventilation should be fixed with rip. To do this, you need to glue textile velcro, consisting of 2 connective parts with each other. To fix the Roles, it is necessary to press the velcro beam to the window frame. This will allow tissue to be fixed in the extreme lower position.
Start a discussion ...