When installing the water supply system, the insulation of pipes is a prerequisite. This is necessary to avoid freezing, and as a result and breaking the pipeline.
In the near past, insulation could be carried out on one single technology, based on the fact that only one insulation was at the disposal - glass gamble. Now, the fruits of technological progress significantly simplify the lives of building organizations, as modern insulation are so diverse, and most importantly, it is functional that each developer has the ability to choose the best option, given those or other characteristics.
Analyze the insulation for pipes is ungrateful, since each buyer will look for its special parameters and characteristics of the material for insulation of the water supply system, we recommend to look at the details for the correct selection of the pipe on the site http://trubygid.ru.
Therefore, consider their basic views. If we talk about the technology of using insulation, they can be classified for: leaf, rolled, filling, casing and combined.
The main requirement for materials from which the insulation is produced is its low thermal conductivity and high fire-resistant material quality.
1. Mineral wool. Available both in a bar, and in rolls. In case the insulation needs a large volume of the pipeline, the use of this material is not rational from an economic point of view.
2. Polyurethan. Experts consider this material one of the most effective. This method is used immediately in the process of laying the pipeline, as the pipes are mounted
3. Polyopolmineol. This insulation combines excellent quality with the convenience of installation, it can be used for both steel and for metal-plastic and other polymer pipes.
4. Penosole. This material is excellent for insulation of pipes of the external pipeline. The method of its installation is liquid styling, using special equipment. Such
5. Foamed polyethylene. Widden in domestic insulation of water pipes from various types of materials. The material is convenient for use by even people who have no special skills in construction.
6. Foofed foam. Produced in rolls. The inner layer consists of aluminum foil, and the base of polyethylene foam. Prost and easy to operate.
Before purchasing any of the types of insulation, it is desirable to compare the tasks that you face with the capabilities of the insulation. Good shopping!
Prefabricated pipeline in a country house
Technology of Heat Frame House
Start a discussion ...