The repair of the apartment, as a rule, ends with finishing works, and they, in turn begin with the ceiling finishes, unless of course we are not necessary about the stretch ceiling, you do not need it.
The option of the usual ceiling whitewash has long been considered one of the most banal, since currently there is a large number of alternative options to it. Ceiling wallpapers were widely used, but even more interesting and in the original way to separate the ceiling is the pasting of its grid grid. In everyday life, this process is called "finishing by a cigarette."
The material used for such a finish is thin glass windows, the so-called glass choles. Usually they act as coverage under painting. They are based on the microfiber bonded with thin threads of glass and synthetics. Due to the complex design, the material has high strength and is therefore often used as a reinforcing base in finishing work. The glass cholester is not only a solid material, in addition, it is an eco-friendly, moisture-resistant, resistant to the formation of corrosion, also does not require constant thorough care and has aesthetic appearance. However, in circulation, it requires accuracy - the presence of bends on the canvas can cause its cliff.
Before glueing glass choles, you need to make sure that the ceiling plaster dried well, after that the ceiling is sweeping with one rough layer and then after drying the coating is ground. The surface is considered prepared and can be moved directly to the application of fiberglass. Ceiling Technology "Ceiling" is similar to the technology of adhesive the usual wallpaper. The glue is applied throughout the perimeter of the base, the canvas need to smooth out well by it using a spatula or rubber roller. It is necessary to ensure that the entire glassball is sufficiently saturated with glue, otherwise the uncrossed areas can subsequently break away from the base due to swelling. To remove unnecessary canvas strips, you should use a raw knife. The windows and doors of the room must be blocked throughout the time of the drying of the glue, usually it takes no more than a day. The resulting coating passes a double putty and primer, after which it can already be painted.
In order to avoid health problems, all work is recommended to be carried out in clothing as much as possible all parts of the body.
Start a discussion ...