By preferring the walls of the walls by plastic panels, many are wondering - is it possible to fix them on plasterboard and how to do it? You can do this, of course, you can recommend you to watch a very detailed master class with step-by-step photos here.
And the plastic panels are attached to drywall in two ways: with the help of self-samples or with the help of adhesive composition. Consider both methods in more detail.
The first method involves the fastening of plastic panels to a metal or wooden frame with self-draws through a plasterboard sheet. In this case, it is necessary to take into account the location of the carrier profiles of the frame and sheets of plasterboard. After all, plastic panels are attached perpendicular to the profiles. Therefore, if the carrier profile is installed vertically, the plastic panels should be fixed in a horizontal location. Painted panels with self-drawing through the plasterboard. It is necessary to do this in those places where the carrier profile is located. If the panels are fastened in the horizontal direction, it should be started at the bottom. If the panels are attached vertically, it should be started from the left corner towards the door or the window. In both cases, the scallop of the panel should be located in the direction of movement.
The second method involves the fastening of plastic panels on plasterboard with an adhesive composition. In this case, the panel can be attached to any direction. The order here also does not matter. And since the plasterboard is a fairly smooth surface, then the alignment of the walls is not required. For this method of installation, liquid nails are best fit. The glue should be applied on the root side of the panel in the center and throughout the perimeter. After that, it is necessary to wait a bit so that the glue has absorbed. Then the canvas need to be attached to the plasterboard and firmly press through its entire surface. As soon as the first panel is glued, you can start next. It should be inserted into the previous one. So should continue until the whole wall is made.
In order for the plastic panels to keep on drywall, you can still combine these two ways. First, glue the panels to liquid nails, and then fasten with self-draws. However, in this case, it is necessary to comply with the conditions for each of these methods.
Plastic windows for winter garden
Balcony arrangement in the country
Start a discussion ...