Wooden slopes on the windows: Installation instructions. How to make wooden window slopes. The article discusses the features and methods of installing wooden slopes on the windows.

The slope is called an external or inner part of the window opening. These elements are divided into several species depending on the material used. There are plaster, plastic, plasterboard and wooden slopes. About the features of the installation of the last type it will be in this article.

Content

Features of construction

Today, a fairly common type of discovery is plasterboard structures. The opening is covered with plaster composition, after which it is painted in the desired color. The main advantages of this finish are the available cost and simplicity. But such slopes do not differ in durability, their service period is limited to 2-3 years.

A more favorable option is the slopes made on the basis of polyvinyl chloride materials. They can be used for outdoor and interior decoration. Panel data are distinguished by practicality and long service life, but they are not devastable. The width of plastic slopes is 25 cm. If the depth of the opening exceeds this indicator, the panels need to be allowed, as a result of which they acquire a not very aesthetic appearance.

Ducks from plasterboard are used only indoors. They are installed in combination with thermal insulation materials. The advantages of these products include high decorative characteristics. They successfully complement the interior made in any style.

Sunsaws made of wood are also sought after finishing materials. Consider their operational characteristics.

Advantages:

high aesthetic indicators;
environmental Safety;
durable fixation of panels to window design;
sucks are made on the basis of modern high quality materials;
panels can be made any parameters and forms;
the presence of a paint coating.

Wooden slopes on the windows allow you to solve several tasks:

First of all, their insulation properties should be noted. When mounting the window design, joints and slots are inevitably formed, which are closed by slopes. This prevents the loss of heat and penetrate the noise from the street. Thus, the panels increase sound insulation and thermal insulating quality windows.
Wood-based discovery preferably decorate wooden window structures for which the issue of moisture insulation is particularly relevant.
The panels are not allowed inside moisture and thereby prevent the formation of mold and fungus, which allows to extend the operational period of construction.
Also these products prevent cold air penetration. In the process of installing the window, the resulting junction is filled with mounting foam. But this sealing agent is not distinguished by a long period of service. After an insignificant period of time, the foam begins to collapse and coldly go through the resulting gaps into the room. The presence of slopes will avoid these consequences and maintain a comfortable temperature in the room.
Along with the obvious practical advantages, high decorative qualities of tree slopes should be allocated. They help hide various errors, the appearance of which is inevitable when installing the window. For example, chips.

Wooden slopes on the windows. Photo:

Choosing wooden slopes

Wooden window slopes should be chosen from the wood of wood, which was used for the manufacture of the frame. This will make it possible to achieve the unity of the color gamut and the pattern. Each type of wood has a special texture. When combining two different breeds, it will not be possible to avoid obvious differences. Sucks can reach 2.8 m in length and up to 1 m wide. Their thickness is 12 and 15 cm.

Panels are manufactured based on FSF plywood. This material has resistant to moisture, high strength and wear resistance. The base is covered with veneer from natural wood. A ground mixture is applied to the surface of the slopes. This allows you to perform high-quality processing of the product with paint and varnishes. To cover the slopes of wood, a transparent or colored varnish on a polyurethane basis is used.

Wooden outdoor slopes are recommended to choose from larch. This is quite solid, durable and elastic material, which is resistant to mechanical and atmospheric influences, rotting processes, and not afraid of pests. In addition, the product from this breed is distinguished by a relatively low cost. This is due to the rapid growth of larch.

Until recently, the feasibility of installing outdoor slopes caused doubts. But the practice has shown the need to apply these structures. A foam, which is processed by the space between the wall and the window design, is an effective sealant only at first glance. In the process of drying, it fills all the space and prevents airflow penetration. In some cases, the foam is replaced with a sealing ribbon.

These materials give the necessary result only if they are used with slopes. In the opposite case, under the influence of wind, after a certain period of time, they will lose their operational qualities and moisture will begin into the inside. In the case of plastic windows, the consequences will be limited to the decrease in the temperature level indoor. Wooden design under the influence of moisture can deform. It is also possible to form mold and the development of the process of rotting wood.

Preparatory stage

Before embarking on the breakdown, you need to make sure that the window block is installed correctly. If there are defects, for example, horizontal and vertical deviations or curvature of the panel profile, they are only emphasized.
Today, cases of poor-quality production and installation of metal-plastic structures are not uncommon. To eliminate vertical deviations, you should use a plumb. It must be fixed in turn over the two vertically located profiles of the window block and make measurements using a roulette in the upper and lower part. The space from the stretched cord is determined to the base. Normally, the obtained indicators must be identical.
Horizontality is checked by level. To check whether even window profiles are needed to pull the cord on the outer lines of the frame.
It is possible to determine the presence of possible distortions and deformations by measuring the diagonals of the structure.
It should also be inspecting the profiles for damage, such as scratches or chip. There should be no air bubbles or cracks on the double-blade.

During the preparation, you must also perform dismantling work, which include:

elimination of remnants of previous slopes;
removing surplus foam;
removing the anchor plates if they create an obstacle to the installation of slopes;
removal of protective film coating from windows;
processing with a composition or foam possible through holes.

Installation of wooden slopes

Installation works start after 12 hours after mounting the window. This time is necessary in order for the foam to dry and accepted the final form. But it is not recommended to tighten with the installation. Installation foam does not apply to stable materials and is quite quickly destroyed. Therefore, it must be closed from external influences as soon as it becomes possible.

There are two methods for installing wooden slopes:

The first assumes fastening with foam. Work begins with the measurement of panels and cutting them in accordance with the required dimensions. Especially carefully take the corners. They must be as smooth. For each window, the slope is clipped individually. Next panels are mounted in the area of \u200b\u200bangular connections. Self-tapping screws are used as fasteners. Slopes should set up in the window frame grooves. The resulting space is filled with foam. It should be borne in mind that this sealing composition in the process of drying is 3 times increasing in the amount.
The second method of installation involves the following actions:

initially, the panels are seen under the required parameters and trimmed;
next to them is attached insulating material. For this purpose, mineral wool is used, from which the strips of the appropriate size are cut;
after mounting the insulation, it is covered on top of a polyethylene film, which is fixed with the help of bilateral tape;
the panels are then fixed with each other by means of screws;
the resulting frame as a result of these actions should be installed in the groove of the window structure.

How to make windows slope in a wooden house

For outdoor decoration, it is recommended to choose a material that is resistant to the negative impact of moisture. Inside the room you can install any slope. Window structures in the wooden structure are decorated with plastic, wooden panels or lining. The last type of material is distinguished by universal qualities and can be installed both with external and on the inside of the building.

The lining is made by gluing with a special adhesive composition of several sheets of wood. The surface of the product is treated with varnish, which increases the stability of the material to the effects of negative factors. Due to the presence of such a coating, the lining retains its operational characteristics in a minus temperature. Today in the construction market you can find the Eurovantia, which has a greater thickness and density relatively with the usual material.

To make wooden slopes on the windows with their own hands from the lining need to be prepared:

wooden panels;
corners internal and external;
self-tapping screw;
sealant;
screwdriver.

The order of work is as follows:

When working with uneven walls, an initially installed a doom. Reiki are selected taking into account the thickness of the finishing panel.
When preparing the bars, the size of the slopes and the installation method should be taken into account.
Fastening the crates is carried out along the perimeter of the window opening using self-samples. To do this, use a drill or screwdriver.
If desired, the opening can be inspired. The space between the rails is filled with heat-insulating material, such as foam.
If there is no such problem as unevenness, then the installation of the crates is passed.
Self-tapping screws and screwdriver are also used for fastening the lining. The procedure for action depends on the installation method.
With vertical installation, the slopes are fixed, ranging from the frame into which the grooves must rest.
The panel is then fixed using fasteners.
If the installation is carried out horizontally, work should be started below. The launch strip is pre-mounted on the frame.
The slopes are initially fixed in the opening of the strip, and after each other.
Next, external and internal corners are installed that help disguise the possible defects and ensure the tightness of the structure.

How to make wooden slopes on plastic windows

The installation of slopes from natural wood with a plastic windshop - not uncommon. To arrange the opening in this way, you will need to do the following:

Initially, along the perimeter of the opening along the sloping line, starting guides are installed.
On the wall, these parts are attached by screws. To do this, with the help of a perforator or drill, you need to prepare holes.
Guide elements must be exhibited as soon as possible. The verticality of the installation is monitored by level.
Next, the slopes are adjusted in accordance with the required dimensions and insert into start guides.
Then the slots between the panels and the wall are filled with a sealing agent.
The sealing zone is stuck with painting scotch.
Before you perform the following actions, you need to wait until it is completely dry.
After that, in the area of \u200b\u200bthe joints and on top of the sealing composition, decorative corners are installed.
Surplus foam with panels should be removed.
Wooden slopes on plastic windows allow you to create a certain contrast, which gives the interior of the original direction.

Conclusion

Nuts from natural wood perform a decorative and practical function. They hide all the errors formed in the process of mounting the window design and give it a more attractive appearance. In addition, the slopes contribute to the preservation of heat in the room and prevent the penetration of noise from the outside of the building.

Speaks on the window in a wooden house. Video: