Installation of acrylic bath on frame or bricks

Acrylic - the material is quite new, it makes absolutely everything, starting with artificial nails and ending with sandals and baths. Acrylic baths are currently the most in demand, due to a number of positive properties - a small weight, compared with cast iron and steel baths, material flexibility, a variety of forms, the possibility of setting an angle, the presence of all sorts of hydromassage systems.
The installation of the acrylic bath can be carried out in several ways: this is an installation on the legs provided by the manufacturer. It should be borne in mind that in the acrylic bath legs are screwed with screws to the bottom. If there are no specially prepared holes, they will have to do themselves. Acrylic is the same plastic and drilled very easily, so it is important to use a drill with a limiter. Especially the bay bubble does not need to do, as it is already provided for the form of the bottom, the sides must be located smoothly.
Corner acrylic baths are convenient and compact. Two sides of which are usually smooth and located along the walls, at right angles. The third party is rounded and is a free edge. Installation of the acrylic bath corner provides also the installation of the crane and the screen. Plastic crane, usually, comes with a bathroom and is installed with a floor gap. After the product is aligned, the tips of the supports are scrupped with acid silicone sealant to firmly fix on the tile of the legs of the bath. When the installation of the bathroom is over, the screen is fixed.
One of the most reliable ways is considered installing an acrylic bath on a frame. In this case, the bath is less deformed under the weight of water and man. And if you simply do not go with the bathroom in the set of legs, the installation of an acrylic bath on bricks will be the only possible and reliable way. From the brick, it is necessary to fold the framework, which will not interfere with the use of the siphon and other existing designs. Between the bottom of the bath and the base should be one centimeter. To the walls, the sides of the bath can be fixed on hooks, and you can make a whole brick niche, in which your bath will be firmly located. The distance between the bathroom and brick should be filled with mounting foam. All available gaps between the masonry and the bottom of the bath are also rolled.
The scheme of installation of an acrylic bath of any shape and size can be found on the Internet or ask the seller. Surely you will be offered services of professionals who are engaged in installation and make repair of acrylic baths. You will be able to choose to entrust work to masters or try to cope with it yourself.