The technology of drilling wells for water, first of all, is selected depending on the type of well, as well as the choice of well depends on the desired volume and quality of water, more can read here -
The water well is the cost of drilling.
Water drilling technology manually.
This technology of drilling wells for water is considered the cheapest and affordable, and besides, the name of this technology can be completely any. This well can be easily and just scored in the basement of the house. To lift the water, it is recommended to use a self-priming pump, so the height of the aquifer can be no more than ten meters. But instead of the pump can also use the usual manual rocking of water.
This option can be considered ideal when mastering a new country house or during the construction of the house there are no centralized systems. But sometimes people can use drilling of wells for water and in case of continuous use of the house, but with minimal water consumption.
But remember that such a small well can dry in the summer season during a strong drought and heat, and a variety of contaminants can get into the water to water. And therefore, only one advantage in the use of this technology can be noted - this is quite low cost.
Sand Drilling Technology.
Another name of this technology is a filter well. This may be due to the fact that at the bottom of the water intake part there is a special filter. This technology in the suburbs is most often used for screw drilling and blade gold.
This method is excellent for soft soils of clay and sublibious soil type, but in no case this method cannot be used for solid or bulk types of soil.
The depth of drilling wells on the sand is mainly carried out to the depth of thirty-forty meters, and the drilling process itself takes three to four days.
This method of drilling a well on water can be considered the most difficult, because there is no likely that the crystal and high-quality water will be found, but still nobody prohibits, so you can try to find water in such a soil.