To collect a good harvest on its summer cottage, relax in the shade of curly plants and admire their beauty, just water and fertilize the soil, it is necessary to ensure proper care that the plants develop correctly. Not all dackets lovers know that for curly plants it is necessary to support. The slim skeleton of the plant, gaining strength, will strive up and cling to the support. As a support can serve as an ordinary strong stick (it must be simply sticking to the ground) and the wire. Such options can be configured temporarily, but for a long period they are not suitable. For example, if you grow grapes, then you need to build a reliable design. For the cultivation of cucumbers, most experts recommend installing a sleeper.
Slear is a multifunctional design that creates good conditions for the normal development and growth of curly garden crops. For each plant, you need to make your helpler. For example, supports for growing cucumbers and tomato are reconstructed. And in order to grow curly roses or grapes, it is necessary to build a more reliable, solid and durable design.
Photo Trelliers:
A special design is best suited for tapers for cucumbers, but not always the dacnikniki has the opportunity to buy everything you need, especially if the country area is away from the city, to go to the economic store behind the steleter, it is necessary to spend a lot of time. Dachnikov, as you know, every minute in the account. Therefore, we will make the manufacture of highs on their own sirred materials.
Why do you need to install a sleeper?
Among the dacities of newcomers there are people who do not know how to properly grow curly garden crops. As a result, they seem to do everything right, planted seedlings, watered and fertilize the soil, and the harvest is very meager.
The main purpose of the Trellier is to ensure normal growth for curly plants and garden crops. Thanks to this design, the stems of cucumbers will not break and step on the ground, the ripening fruits are easier to collect on the chopler than to find on the ground. As a result, the plants are not covered, not wet and not dried. As you can see, with the help of a simple device, you can avoid many problems when growing cucumbers. In addition to the above, growing plants on the spleker very convenient, you can always ask for garden crops the necessary direction of development, which will be convenient for you.
Such structures, acting as a support for curly plants, are found almost at each dacha. Naturally, many people build up trenches independently from branches and old sheets.
Advantages and disadvantages of supports for growing cucumbers:
- thanks to the sleeper, you can move freely between the rows, without feasible to step on the plant;
- the cucumbers on the sleeper are blocked, the leaves will not sweat, the water droplets on the leaves are not formed. This means that the plant will not hurt;
- it is now easier to collect a harvest, you don't need to face every beach whip to find the fruits. Cucumbers will now be in sight;
- shoots do not need to turn over and direct to the light source;
- the minus has only one to the tag, it is the complexity of construction structures at the initial stage.
Materials for the construction worker
As materials serve any submitted means. It looks beautifully with a trellis of wood, which is made in the form of a geometric shape (rhombus, square, rectangle with cells). Such constructions will serve more for decorative curly plants. And in our case, in order to grow cucumbers on your household plot, you can build a simple design. Wooden rails, thick sticks or segments of plastic pipes can be used as a support.
Between the supports it is necessary to pull the rope along which the plants will crawl up. As this material, you can use a soft rope, twine or cut into strips old sheets, kapron tights. Instead of sheets, you can take an old T-shirt. The main thing is that the material is mild and the plants are not crashed into it. The usual wire will not fit, and in a soft shell is allowed, it will last for a long time.
How to make a sleeper for cucumbers
Without cucumbers it is impossible to imagine our garden, we love there are cucumbers in the fresh form, add them to salads, salt and quasim. In winter, it is also not to do without cucumbers, so it is so important to comply with all the rules of growing this garden culture. Anyone will be able to build up trenches for cucumbers with their own hands. For this you need materials. We recommend not to rush and perform work efficiently.
Consider several variants of the steller. The first way - we will construct support for cucumbers from the old car tire. Each dacket has a pair of old car tires that can be used in the farm.
So, it is desirable to find a large tire from under a truck or tractor, small too. We first first cut off one side and put it on the ground to the place where we will grow cucumbers. We also use the second part of the tire and put it nearby by retreating a small distance.
Next, we will need 2 rods from metal. They need to be inserted into the tire so that the arc is.
Inside the automotive tires, we smell the land, the remaining space over the tire is covering with a canvas bag, the edges can be wrapped under the wheel so that the view was neat.
In the fabric we make several holes and garden cucumbers (seedlings or seeds). Top covert film. So that it does not fly with strong wind, put the edges of the film with stones or something heavy.
Do not forget from time to time to loose land and water. When you water the cucumbers, the film is gently lifted, but after watering it needs to be returned to the previous place. Such protection will help protect the plants from bad weather.
When the cucumbers are growing and rummaged, the film with a bag can be removed, and in the center of the circle put a robust pillar, at the top of which to attach an old bike wheel so that it is located horizontally. The feler is practically ready, it remains only from the base to the wheel to stretch and consolidate the rope, then wait when plants will be placed up to the sun.
As you can see, nothing is complicated. Instead of a car wheel, you can install a column and stretch the twine from it. You must have a shala shape.
It is possible to build up the sets for this principle not only on the garden, it is necessary to grow a little soil for growing cucumbers, which means you can create conditions for normal growth of the plant anywhere: next to the wall, fence, post. Plants will grow everywhere, most importantly - so that the cucumbers have the opportunity to take up.
How to make a sleeper. Method 2.
As you already understood, ways to build a grinding chopper for growing cucumbers. Consider popular options, such trellis can be made independently, in just a few hours.
How to make a sleeper:
- Place wooden columns on the beds.
- Between the columns, pull the finelystic mesh (it is sold in the store). This design can weave independently from the rope or tissue strips. Cell size - 10x10 cm.
- The columns are dropped at a distance, at least 1 m from each other so that the design is stable and not deformed under the severity of growing cucumbers.
- As cucumbers grows, it is necessary to strengthen the design of the taperanel, for this it is enough to wear a few more horizontal jumpers. The material can be different - wooden peasants, sticks, rails or metal bars.
And this helpler must be constructed only after the plants are already planted. To work, you will need a rope or soft wire (use any firm material), 3 stable columns and several pegs (wooden or metal).
How to make a sleeper correctly:
- drive columns (2 pcs) on each side of the garden. Pillar height - 1.5 m;
- nearby we drive the remaining column to wrap our dressing material around him;
- on the sides of the beds insert the pegs (on each side);
- now we start weave the support from the rope. To do this, fix the rope at the bottom on the peg (we make the nodule), and stretch it up, to the crossbar located across. We bring around and attract the rope to the peg;
- now the rope needs to wrap around the knife itself and pull up again;
- thus, "weave" the grid.
Important moment: to build a sleeper before plants begin to fly. As soon as 2-3 first leaves appear from the ground, it's time to start work.
The designs described above are the temporary supports for growing cucumbers. If you have a desire, materials and some time, you can make wooden trellis. They will serve you for many years.
The design of the wooden base from the rails. Outwardly, it resembles a staircase with jumpers. From each rail, you need to build several cells so that the plant as it might be chained around them. Cell size - no more than 15 cm.
In order for the tag to withstand the load, pick up the rails, a width of at least 3 cm, for horizontal columns, it is necessary to use supports with a thickness of 5 cm, and for vertical crossbars - 4 cm.
Subtleties: First, you need to build a square or rhombus, and then attach the grid of thinner on this base. By the way, instead of a tree of wood, you can take a harness, rope or soft wire. This design will cope with its tasks, and will still perform a decorative function, decorating your site.
Popular version of the construction workers with their own hands
A common design of the grinding chopper for growing cucumbers is a P-shaped form. It is very simple to do it - on the edges of the garden it is necessary to install 2 strong supports (wooden columns, rails, pipes, etc.). Between them you need to pull the grid. In order for the design to be stable, every half meter drive the pegs in the ground, and on top it attach to the supports horizontal jumper (pipe, stick, wooden slaughter).
It turns out the P-shaped design, on both sides there is a grid, which will be placed by cucumbers. Such a sleeper must be constructed after the cucumbers are planted.
How to handle a sleeper
Now you know how to make a sleeper yourself and install it. If there is no possibility to make a solid and reliable design, then the sleeper at the end of the season can be disassembled to use these materials to take the next year.
In order to use the sleeper again for growing cucumbers, choose supports from durable material (oak, ash, chestnut or mulberry). It is undesirable to use poplar sticks, maple and birch, it is also impossible to construct a wet timber.
Try to process the lower part of the tree support with an antiseptic - scrut the base with olphoi or solidol. You can also use a resin or oil paint, so you will prolong the service life of the materials for the support. By the way, chestnut and white acacia, even without processing, can "hold out" for several years. Only if your plant is sick with mildew, then using last year's materials, you risk infecting new plants. So it is best to handle the components of the trellis.
Metal elements Trelliers also need to handle paint, but PVC pipes do not need treatment, nothing will happen to them.
If you used a plastic mesh, it is quite well to wash in soapy water. For soft dressing material - clothes rope and tissue tapes, it is advisable to spend thorough treatment. All the material is going to, first you can soak the rope in the soap solution (use the economic soap), and then boil over 20 minutes in a new soap solution.
Now you know how to independently make a sleeper for cucumbers. You can reinforce your knowledge if you look at this video:
Start a discussion ...