Greenhouse for cucumbers do it yourself

In the country areas, as well as in private households, greenhouses for cucumbers are often installed. As a rule, they are structures covered over with a light-permeable material. There are also greenhouses with wooden strapping in the form of a small pit. In such a greenhouse, the seedlings usually hold a short period of time. More reliable is a reinforced concrete strain. Sades on their sites often use low greenhouse design. The fact is that in such a greenhouse, the soil warms faster to the optimum temperature, and the heat is retained quite a long time. On the features of the construction of such greenhouses, we will also tell me further.

Basic moments

In order for the structure to be easier to build independently, as a frame, you can purchase arcs made in the factory setting from steel or plastic pipes, which are set at a distance of 0.5-0.7 m from each other. After that, they can be connected to the twigs made of soft wire or thin reinforcement. Then the film must be laid on top, after which its ends are fixed using stakes stuck in the ground.

Regardless of the method of building the greenhouse, the main thing is to create a microclimate suitable for growing vegetable culture. It is completely easy to achieve. After the construction of the greenhouse, we leave it for a few days. During this time, inside the greenhouse should form the temperature optimal for the development of cucumbers. The design of the film greenhouse is not only convenient and compact, but also mobile. It can be installed in any place you like. In addition, it is quite simple to collect it. Next, you will learn how to make a greenhouse for cucumbers.

When the design for the greenhouse is selected, first of all, you need to pay attention to the simplicity in the design and quality of plant protection from various negative impacts. Even a person with a small experience of such work can cope with the construction of such a building. Our article will help in this. Greenhouses for cucumbers allow you to close and open growing vegetables if necessary. For example, at night they can be closed to protect against frosts.

When planning a greenhouse design, pay attention to the presence of ventilation channels. For compact greenhouses are suitable forces. They will be quite enough for normal air exchange. To heal air inside the greenhouse, biofuels, gas or electricity are most often used.

How to choose a place for a greenhouse

If you do not know yet, a big or small greenhouse is better to build, then ask yourself an elementary question - whether the cucumbers will grow in this greenhouse all year round, or it will be needed only for growing early varieties of these vegetables.

When choosing a place for planting cucumbers, first of all, it is necessary to take into account that seedlings should receive a maximum of sunlight throughout the day. In addition, it must be well protected from the wind. The greenhouse is recommended to put it so that it is oriented from East to West.

It is necessary to trace the place to be in place where the greenhouse was installed, did not flow moisture. The surface should be quite smooth, trees should not grow nearby. It is desirable that at the same time the greenhouse is located near the house. If it does not constantly be used, then there is no particular sense to build a foundation. If the greenhouse is erected for continuous use, then the reason will need to be done. For this, the pit is broken down by a depth of approximately 1 m. After which the crushed stone layer is placed on the bottom. To enhance the foundation itself, it is possible to use fittings or a reinforced grid.

Difference of the greenhouse from the greenhouse

Often these two concepts are confused. They are really somewhat similar, but something is significantly different. So, most greenhouses are massive structures of high height (although there are low greenhouses). The volume of the greenhouse is usually not too big, which makes it possible to maintain the necessary temperature with less costs.

The construction of a greenhouse is spent much less materials than on the construction of the greenhouse. The greenhouse form can be different - square, rectangular and even round. In their design, the fortage is made, with the help of which their interior is ventilated. In addition, it allows you to maintain a normal temperature mode. The main task here to make a frame right.

Materials for the carcass

The carrier design of the greenhouse should be paid to special attention. The strength of the construction as a whole largely depends on its reliability. For the manufacture of a frame often use wood. This is perhaps the simplest design, but at the same time it is quite reliable.

Wood frame has a lot of advantages:

1. Usually, only high-quality wood species use for it. It is important that the wood is previously prepared, the drying and processing by antiseptics.
2. In addition, wood frame can last long enough, at least 15 years.
3. Of the advantages, it is also worth noting the wear resistance of this material, due to which even after a fairly long time it does not change its form.
4. In addition, this design can be quickly collected and installed. Often, in order to collect a wooden frame, you have to use boards and planks available on your personal site, and previously considered unnecessary.

As for the shortcomings, it is worth noting the poor stability of wood to moisture and the sunshine, under which it is quiet. Therefore, the frame after installation is recommended to be covered with paint or varnish. Thanks to this operation, a wooden greenhouse frame, protected from external influence, will last for quite a long time.

Greenhouse frame often make metal. Such structures can withstand very large loads, including the severity of snow in winter. But, like most metals, such a frame is subject to corrosion. To prevent it, you need to use a special processing agent. The metal frame is most often made from profile and thin-walled pipes, channels, as well as high-diameter fittings. Since they weigh a little, it makes no sense in their installation on the rammed soil or foundation. Metal frame parts are usually connected by simple welding. But it must be borne in mind that, if you use not thin-walled metal, the foundation should be quite solid. At the same time, it must go into a soil at least 300 mm. If you decide not to equip the basis, but concrete individual pillars that will be a carrier element of the design, the depth of their occurrence should be at least 0.8 m.

The safest, perhaps, you can call the PVC frame. Its strength is determined only by the thickness of the profile, from which it is made. Such frames have a small weight, which is both their dignity and disadvantage. So, thanks to a small weight, a similar greenhouse can be easily assembled and transported. The lack of a small weight is that when excessive loads, the frame may break. To avoid the latter, additional elements use to strengthen the design. Greenhouses with plastic frame are durable and resistant to temperature fluctuations. As for the installation, it is performed directly under the film.

How to make a wooden frame

For the production of work, we will need a sawn timber, mainly a bar, of various sections and lengths. It will be opened by an electroll bison. In addition, a screwdriver and self-tapping screws will be needed. To perform the base around the perimeter, the concrete solution is needed, filled first into the wooden formwork. As an alternative, you can install bearing poles for the design, and pour each well concrete. If the last option is selected, it should be borne in mind that there is a likelihood of placing from polycarbonate. In order to avoid this, it is desirable to pour a ribbon foundation to which the entire design is installed. If its size is small, then there is no need to build a massive base.

When a concrete base is ready, then the pins (from metal or wood) should be placed on top of it, through which the frame itself can be attached. It is possible to install a wooden frame to the wooden fastener by screws or nails. Metal fasteners are usually mounted using bolts. By the way, the use of bolts allows you to make a completely collapsible frame. Due to this, if necessary, it can be removed from the site.

Features of greenhouses from polycarbonate

Greenhouses for cucumbers from polycarbonate today are very popular. After all, this material meets many requirements of gardeners:

1. First of all, it is durable and reliable. Polycarbonate is able to withstand fairly heavy loads. In winter, a lot of snow is collected on the surface of the material and, despite this, it is not deformed.
2. In general, this material is considered the most solid matter of all known polymer compounds.
3. In addition, it is practical and durable. He does not need special care, it can be easily mounted on a frame of any material.
4. At the same time, it can serve at least 20 years. Agree, it's a lot.
5. This material has frost and wear resistance. For the entire period of its use, it will not change its appearance. In winter and during freezers, such a greenhouse will be able to withstand low temperatures, while maintaining the desired temperature regime inside the design.
6. It is also worth noting that this is a rather moisture-resistant material. Its surface does not react to the impact of moisture, and on both sides. It should be noted that polycarbonate evenly throughout its area dispels the sun's rays, which is very important for the greenhouse. This property is achieved due to the presence of many cells of different sizes.

The disadvantages of polycarbonate frame are also available. For example, this material can be easily damaged by fats, as well as inorganic or organic acids. In addition, such structures with high load can still break.

Greenhouse for cucumbers do it yourself

Before starting work, you need to prepare wooden bars and self-tapping screws. Today we will look at how to make a greenhouse from polycarbonate. For the production of works, we will need a certain construction tool.

Phased work order:

1. It is worth starting to shoot the bars with the planer, until their surface becomes very smooth. It will give a greenhouse more attractive appearance.
2. As a fastener, we will use stainless vehicle tapping screws. The size of the self-pressing for mounting the frame must be 55 × 4. The ram for mounting the frame is chosen by a 40 × 50 cross section. For connecting beams, we use the groove in a quarter. The bars themselves are bonded with self-draws among themselves.
3. Then you can proceed to the installation of vertical structural elements. Between themselves frame elements are connected via carpentry tools. If the previous actions could be made at the site of the production of design details, now it will be necessary to transfer the collected frame to the place of installation of the greenhouse. Usually the frame weighs a little. Therefore, to transfer it, the maximum is enough.
4. If the design is too light and at the same time walks from the side to the side, it is recommended to add another bar on the bottom perimeter.
5. Now you can start installing lateral glazing. For them, we will use the polycarbonate polycarbonate sheets with a thickness of 10 mm. To the frame, this material can be attached by stainless self-pressing. The use of self-made aluminum washers (plates) is allowed, which will reduce the probability of cracking the sheet, screwing the screws directly into it.
6. When the walls are ready, you can proceed to the arrangement of the roof. The problem of the roof protect seedlings in a greenhouse from frost and precipitation. It is best made from materials having low heat loss. For example, layers acrylic and polyethylene film.
7. Immediately the roof is made from the bars with a cross section of 20 × 40, between which the film is put on, after which the entire design is neatly tightened with self-draws. As a result, something like a house for cucumbers should be turned out.

As you yourself were convinced, the greenhouse is not a difficult design.

How to grow cucumbers

Before growing this culture, some of its features should be known. For example, cucumber flowers have significant differences. On one stem, both floors are usually formed. That is why they are very sensitive to fertilizers. It is important what soil will lie in the greenhouse. It is desirable that it was compost or humus. If a greenhouse is used, covered with a film, then the seedlings do not need to plant too thick.

When growing, it is important in time to shorten and delete unnecessary side shoots. Without this, a stagnation of wet air can happen, which, in turn, can develop fungal diseases. After these works, the premises need to be well ventilated. As a means for irrigation, it is recommended to use a solution of 1% copper sulfate or 0.5% manganese. When the seedlings are rotted on the roots, it is necessary to urgently take steps to not lose the entire harvest. To do this, Near the seedlings, dig a small wells and pour in them roasted river sand.

When growing cucumbers, it is necessary to follow the right growth of this culture. In particular, it is necessary that the temperature and light mode be favorable. In addition, you should not land cucumbers to each other too tight. Otherwise, in such conditions, fungal infections can develop, which can affect several cucumbers at once. As a result, you will get a bad harvest. In addition, when growing this culture, do not forget that the greenhouse needs fresh air. Therefore, periodically ventilate it.

Greenhouse for cucumbers: photo