Good pickup

Every year it becomes more difficult to work on the plot: give yourself to know the disease, takes your own and age, I want to rest more. How to simplify your work?
The idea to facilitate the garden tool came suddenly. Have you ever had to sew a rusty needle? At least to sew a button? In this case, it is necessary to apply significant efforts. And now let's take a look at our garden tool. Shovels, chips, forks, ribbies, as a rule, rusty, coarse, rough, rough. So we fall, in the literal sense, to drive the tool with the application to the soil. And it is not so easy to pull it. By a tie, we loose soil, raising and lowering it approximately 1 time per second, that is, 60 times a minute, 3600 times per hour! And the tipper weighs about 400 g. It turns out 1.5-2 tons per hour, and it is to work alone with a tip. It is not surprising that hands in the evening fall off.
Arguing in this way, I came to the conclusion that you need to act. The first thing I did is: I sharpened the blade of the trim on the cone, cut extra corners. Hound under the desired angle. The most important thing: polished work surfaces. Blade blade, round floor and sharpened so that when the soil does not damage the roots of the plants. The angle of inclination is 5-15 °, depending on the growth of the dachank (high - 5 °, low-15 °). Westapiles decreased by 150 g. Now my spouse works for this tip - it does not redeem, it does not produce and says: "I do not work with this tool, and rest."
To perform such transformations, I bought a grinding machine, the people called the Bulgarian. In the same way, the shovel was polished: at the beginning the bayonet, then picking. Then it came to rake - the teeth turned out, sharpened and polished. It was much easier to work.
The chipper with a ground surface is easily included in the soil and also easily leaves. It does not stick soil on it. Paying attention:
Such a roof is not necessary with a swing to hit the soil, and you should tilt the blade at a smaller angle and, blocking by 2-3 cm, pull on yourself (cm 20-40, depending on your growth). Soil is easily shrinking through the blade.
Thus, we cut the roots of growing weeds and those weeds that are just drawn to the surface.
And if you need to loose deeper? Please stretch in the same place, drowning the chipper by 3-5 cm, but already a little further from the roots of the cultural plant. If the trick is immediately burst, then it will be almost impossible to stretch it, especially if the soil you have loams, and even dry.
Be sure to sharpen the tool: Take sandpaper, clean and polish the working surfaces - in this case you will greatly help "Bulgarian", lubricate the surface with machine oil to keep the polishing.